Colorado general chat...

Collapse
This is a sticky topic.
X
X
 
  • Time
  • Show
Clear All
new posts
  • Bishop
    R3V Elite
    • May 2009
    • 4913

    #5116
    Also, in other news... I did this yesterday.

    Apparently I can't embed.




    Oh, and Northern CO is beautiful on 287 headed toward Laramie... Got off 287 for the range and was just in the middle of awesome country.

    PM me for detailing services in the Longmont / Boulder Area in Colorado!
    Originally posted by DTM190
    "fuck the kangaroo dude, his toilet water swirls the wrong way anyway, plus i never liked crocodile dundee or Steve Irwin and vegemite tastes like shit"

    Comment

    • Bimmerman325i
      R3V OG
      • Dec 2007
      • 6854

      #5117
      Originally posted by fsmtnbiker
      BMWCCA AutoX school and Event 1 last weekend went great. Course on Sunday was fun, and fast... Rev limiter in 2nd gear through a slalom/transitions. Pretty entertaining, and the weather stayed dry if a bit cool. 9 runs on Sunday!

      If anyone is considering trying out autocross, I would encourage you to join BMW Club and attend. You are guaranteed to get a lot of runs because they cap their entries, and the environment is more relaxed than SCCA events.

      Also, AST's kick ass. My car, even on dead-lops and with some other challenges, posted a time 2+ seconds over the next fastest car. Super-fun.
      That sounds awesome! When is the next BMW Club one?
      2017 Chevrolet SS, 6MT
      95 M3/2/5 (S54 and Mk60 DSC, CARB legal, Build Thread)
      98 M3/4/5 (stock)

      Comment

      • Roland H
        R3V Elite
        • Mar 2009
        • 4480

        #5118
        Originally posted by Bishop
        Oh, and Northern CO is beautiful on 287 headed toward Laramie... Got off 287 for the range and was just in the middle of awesome country.
        Yes, it's very scenic. Used to drive that all the time up to school and back. Gets super sketch in bad weather though. My friend from UW lost his life to that road around this time last year.

        Comment

        • Bimmerman325i
          R3V OG
          • Dec 2007
          • 6854

          #5119
          Originally posted by Roland H
          Yes, it's very scenic. Used to drive that all the time up to school and back. Gets super sketch in bad weather though. My friend from UW lost his life to that road around this time last year.
          Sucks, wasn't he the e46 guy?
          2017 Chevrolet SS, 6MT
          95 M3/2/5 (S54 and Mk60 DSC, CARB legal, Build Thread)
          98 M3/4/5 (stock)

          Comment

          • Bishop
            R3V Elite
            • May 2009
            • 4913

            #5120
            Rip

            PM me for detailing services in the Longmont / Boulder Area in Colorado!
            Originally posted by DTM190
            "fuck the kangaroo dude, his toilet water swirls the wrong way anyway, plus i never liked crocodile dundee or Steve Irwin and vegemite tastes like shit"

            Comment

            • Roland H
              R3V Elite
              • Mar 2009
              • 4480

              #5121
              Originally posted by Bimmerman325i
              Sucks, wasn't he the e46 guy?
              Yeah. AW/Cinnamon, with gold wheels.

              Originally posted by Bishop
              Rip
              Indeed. He was a good dude.

              Comment

              • clarkkey594
                E30 Mastermind
                • Feb 2010
                • 1724

                #5122
                Wasn't he not wearing a seatbelt and got ejected from the car?
                89 325i (Sold)
                95 M3 (Track Car in Progress)
                2001 4runner (DD)

                Comment

                • Roland H
                  R3V Elite
                  • Mar 2009
                  • 4480

                  #5123
                  Originally posted by clarkkey594
                  Wasn't he not wearing a seatbelt and got ejected from the car?
                  That would be correct. :(

                  Comment

                  • Eric
                    R3V Elite
                    • Feb 2004
                    • 5138

                    #5124
                    Originally posted by Bishop
                    Trunk tar? Sunroof equipement? A/C equipment? P/S stuff? Spare tire, etc. etc.
                    I guess a better question would be what HAVE you removed?
                    removed all tar, including the stuff in the transmission tunnel
                    Stuff I removed:
                    -sunroof
                    -AC
                    -PS
                    -Heater core
                    -ABS
                    -cruise control
                    -scrapped the dash down to metal
                    -shaved the door pannels down
                    -removed some excess wiring (not enough)
                    -swiss cheesed the bumper core
                    -interior (obvious) recaro's weigh like 6kg instead of the heavy sport seats
                    -no spare
                    -light weight 50mm E30 M3 exhaust

                    I'm thinking the biggest weight items I have in the car now that can be swapped out is windows and body panels. I kind of like the function of the windows though, as it's my only source of temperature control inside the car. It also is necessary sometimes (this morning) to keep the windshield from fogging up.

                    Originally posted by blefevre
                    Aren't you running something crazy like 18x10's? Your brake/tire/wheel combo has to weigh a lot compared to most people.
                    true, I'm guessing the tires/wheels weigh a good 55-60lbs each. The brakes are actually lighter than the stock E30 M3 stuff. aluminum calipers and hats make a pretty big difference.

                    Originally posted by downforce22
                    i know a guy with an e30 m3 race car down to 2150 lbs then again he is stripped, caged and lightened as much as possible
                    that's crazy light. I just looked up this thread: http://www.e30tech.com/forum/newrepl...reply&p=162637

                    1851 lbs!!! That's silly how light that is!
                    My E30 v1.0 | v2.0 | v3.0 | My E28 |My E34 | My feedback

                    Comment

                    • Bimmerman325i
                      R3V OG
                      • Dec 2007
                      • 6854

                      #5125
                      Hm. Is your exhaust aftermarket? You might want to just go with a custom 3" or 3.5" (S54 gets most hp from the 3.5, euro might too) and lose a significant amount of weight. Also switching the tires from the 18x10s to a lighterweight 18x10 (Dforce/Apex) if you really like 285 grip OR going to the 15x8/225 RS3 combo.

                      Is your car caged at all? Speakers? LTW Battery?
                      2017 Chevrolet SS, 6MT
                      95 M3/2/5 (S54 and Mk60 DSC, CARB legal, Build Thread)
                      98 M3/4/5 (stock)

                      Comment

                      • Bishop
                        R3V Elite
                        • May 2009
                        • 4913

                        #5126
                        Don't do 15s w/ the Euro motor.

                        No one like my video? I sad

                        PM me for detailing services in the Longmont / Boulder Area in Colorado!
                        Originally posted by DTM190
                        "fuck the kangaroo dude, his toilet water swirls the wrong way anyway, plus i never liked crocodile dundee or Steve Irwin and vegemite tastes like shit"

                        Comment

                        • Bimmerman325i
                          R3V OG
                          • Dec 2007
                          • 6854

                          #5127
                          Originally posted by Bishop
                          Don't do 15s w/ the Euro motor.

                          No one like my video? I sad
                          It's the 3.0L Euro, making about as much power (stock) as a bolt on S50/OBD1 S52, so the 15s/225s would work well. I'd rock the 18x10 Dforce or Apex and 285s personally, or a 17x9/255 combo since he does have the fender flares to fit it, but 15s wouldn't be too bad if paired with a sticky tire.
                          2017 Chevrolet SS, 6MT
                          95 M3/2/5 (S54 and Mk60 DSC, CARB legal, Build Thread)
                          98 M3/4/5 (stock)

                          Comment

                          • Bishop
                            R3V Elite
                            • May 2009
                            • 4913

                            #5128
                            I think the Euro will be too much for the 15s but I could be wrong. If he steps down, which he wont, he can't use those purdy brakes.

                            PM me for detailing services in the Longmont / Boulder Area in Colorado!
                            Originally posted by DTM190
                            "fuck the kangaroo dude, his toilet water swirls the wrong way anyway, plus i never liked crocodile dundee or Steve Irwin and vegemite tastes like shit"

                            Comment

                            • Bimmerman325i
                              R3V OG
                              • Dec 2007
                              • 6854

                              #5129
                              Doesn't he have the 300mm Massive kit? that works with 15s.

                              He also could go with the 15x9 or 15x10 949 Racing wheels with the 275/35/15 Hoosier or the 235/50/15 R888......
                              2017 Chevrolet SS, 6MT
                              95 M3/2/5 (S54 and Mk60 DSC, CARB legal, Build Thread)
                              98 M3/4/5 (stock)

                              Comment

                              • Bishop
                                R3V Elite
                                • May 2009
                                • 4913

                                #5130
                                No, he's got some Wilwoods he put together himself... He just listed what all his roller stuff was in the build threads.

                                PM me for detailing services in the Longmont / Boulder Area in Colorado!
                                Originally posted by DTM190
                                "fuck the kangaroo dude, his toilet water swirls the wrong way anyway, plus i never liked crocodile dundee or Steve Irwin and vegemite tastes like shit"

                                Comment

                                Working...