Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
I haven't even touched any of the settings yet. I'll probably enable the "GTS" function that configures for my 4-pot brakes. Can also set tire size, weight, weight distribution, etc....
-
-
-
Great track day yesterday, Turn 2 "late apexing" at the Ridge. $300 for a few 30 minute sessions followed by OPEN TRACK from 5-8pm, it was an all-you-can-eat buffet of driving!
...Last edited by hoveringuy; 05-01-2024, 01:12 PM.
- Likes 4
Leave a comment:
-
-
I love the simplicity!
Both the N54 and DISA intakes have little wiring distribution "crab' boxes that you're not going to have, so think about where you can tuck that. Not having...
- Likes 2
Leave a comment:
-
If you already have a dipstick, is it really worth having the oil quality sensor?? i know that for quantity it only reads the very last quart of oil so I guess it would need to be precisely positioned...
Leave a comment:
-
TIG. This probably isn't the best learning project if you've never welded. I'm an Ok Tig welder but I had a lot of mine done by a local guy in his garage that was an ACTUAL welder, he didn't charge a...
Leave a comment:
-
I ordered and looked at a lot of pickups and learned quite a bit about the science behind them, including stuff like you want one that won't block flow if the pan is pushed up, there are different filtering...
- Likes 1
Leave a comment:
-
Well, a lot has changed in FIFTEEN years. The N52's are all over the junkyards now and M50's are antiques
I think it's pretty much a perfect e30 swap as well as maybe turbo K24...
Leave a comment:
-
Also, This is an awesome way fabricate the pan! A bed plate.
...
Leave a comment:
-
yes, precisely.
The top can be chamfered on inside edge and/or swedged out so it has a bit of flare so the O-ring doesn't snag going in.
I flared mine a bit and it slides in...Last edited by hoveringuy; 04-16-2024, 03:33 PM.
- Likes 1
Leave a comment:
-
projectJTv4 Damn, you make it look all professional!
Here is some more detail on the dipstick. It's two pieces of tubing where the OD of one is the ID of the other, 3/4". It's not like...
Leave a comment:
-
-
At some point when I switched from N54 to DISA intake I fit the Tesla booster just to prove that it fits.
3 Photos
- Likes 1
Leave a comment:
-
*Update*
I returned the unit.
It had a 700w motor and it just wasn't possible to trim it down enough to be suitable for the e30. Lesson is that the e30 needs a much smaller motor,...
- Likes 1
Leave a comment:
No activity results to display
Show More
Leave a comment: