Announcement

Collapse
No announcement yet.

24v no start? What was it?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #61
    Had no relays in my harness haha. Don't know how I missed it.
    1987 325is - S52

    Comment


      #62
      Problem: Weak Crank no spark

      Solution: Water and oil residue in spark plug holes (I didnt pull the engine so i assume thats how it got there) and most importantly GROUNDS GROUNDS GROUNDS. Clean every single on e you can find and then clean em again!!

      Comment


        #63
        Problem: No fuel pressure regulator on my fuel rail (95 325i)

        Solution: Swap out for one with an FPR. Works like a charm!

        http://halden-fabricius.tumblr.com/

        Comment


          #64
          Problem: Spark, Fuel but no injector pulse

          Reason: My engine was a 95 with no Fuel pressure regulator on the fuel rail

          Solution: Replace fuel rail with one that has an FPR
          sigpic

          Comment


            #65
            This is a great thread! I have an auto harness so I'm sure this thread will help me trouble shoot. :)
            SEE THE MOST BORING M50NV BUILD THREAD HERE: http://www.r3vlimited.com/board/showthread.php?t=288275

            Comment


              #66
              Problem: strong crank, good fuel, good spark, no start. Not even a burble. Megasquirt ecu. Will try everything on this thread

              Comment


                #67
                Fuel pump relay died but was measuring main relay.
                I recommend buying the the main relays (main power, f pump, O2 sensor) new.
                They're only a couple bucks.

                Comment

                Working...
                X