Announcement

Collapse
No announcement yet.

Swap 1/4 Mile Thread

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    I hope not. I'd like to hope M50NVers can get respectable times without dogging the piss out of the drivetrain.
    paint sucks

    Comment


      so i havne't been keeping up with this thread, it's been 4yrs since i swapped in my NV M50 and still havne't taken it to the drap strip. I'm too lazy to read through all of this, anyway you NV M50 guys, can you PM me your times and specs, pretty please?

      Comment


        Originally posted by tonytony View Post
        so i havne't been keeping up with this thread, it's been 4yrs since i swapped in my NV M50 and still havne't taken it to the drap strip. I'm too lazy to read through all of this, anyway you NV M50 guys, can you PM me your times and specs, pretty please?
        wow, you are lazy..

        Comment


          Originally posted by tonytony View Post
          so i havne't been keeping up with this thread, it's been 4yrs since i swapped in my NV M50 and still havne't taken it to the drap strip. I'm too lazy to read through all of this, anyway you NV M50 guys, can you PM me your times and specs, pretty please?
          There's a post about 3 back from yours with times. Read through the last few pages of the thread for one or two more.
          paint sucks

          Comment


            Originally posted by Stu View Post
            Justin that's great for a 2.5. Do you shift with the gas pedal on the floor?
            I lift to shit. I have done flat footed shifting but didn't net any difference, so why ruin the tranny.

            Originally posted by tonytony View Post
            so i havne't been keeping up with this thread, it's been 4yrs since i swapped in my NV M50 and still havne't taken it to the drap strip. I'm too lazy to read through all of this, anyway you NV M50 guys, can you PM me your times and specs, pretty please?
            The previous page I have two of my times with specs.

            Comment


              Justin is bye far the fastest n/v m50.

              I ran a 14.8 the one time I went. But I had didnt have my speed sensor hooked up and had a vacuum leak on the booster. Im go again soon. after I fixed the vaccum leak I can take my brothers lt1 formula its a 14.4 second car.
              Last edited by 416stroker; 09-18-2009, 11:20 PM.
              84 318I Delphin RIP
              87 325IS delphin 24v Sold
              89 325 Alpineweiss

              Comment


                Let me know when you are going
                Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



                OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827

                Comment


                  Originally posted by Jean View Post
                  Let me know when you are going
                  I will, I wanna go when the weather cools down or the next grudge race.

                  I wanna see a m30b35 put down a 13
                  84 318I Delphin RIP
                  87 325IS delphin 24v Sold
                  89 325 Alpineweiss

                  Comment


                    well in an effort to be lazy i ended up scrolling through more pages than i wanted to haha. I'll just have to wait for next year to run my car. I'll be damn happy if i can break 14s, i've never driving on a drag strip before. here's my setup

                    NV M50
                    dinan chip
                    k&n cone intake with heatshield
                    uuc pulleys
                    fan clutch delete
                    obd2 manifolds
                    obd2 down pipes
                    single 2.5in exhaust to a magnaflow cat to a 18in long mangaflow muffler
                    and royal purple oil for that extra hp increase haha

                    g260 and 3.73lsd

                    Comment


                      Originally posted by justin_l_ View Post
                      I'm not too bad at it...;)
                      You trapped over 100mph.

                      My best run was 95mph. With slicks and a 3.73 LSD. Dumping the clutch at 3k+ and zero wheelspin. Vanos m50, g260. Dinan chip, CAI, headers, 2.5" single w/ high flow cat/muffler.

                      My buddy's chipped, AA intake/exhaust 97 M3 traps 97mph.



                      I'm not saying you are lieing or anything, but something is up with that motor. It is not a typical 170-180whp m50. MPH is a function of power/weight, with little to do with driver ability (unless you really suck). There's no reason, with longer gearing and shitty tires, and a lack of vanos, that you would be trapping 5mph faster then me.
                      85 325e m60b44 6 speed / 89 535i
                      e30 restoration and V8 swap
                      24 Hours of Lemons e30 build

                      Comment


                        Yea, it was junk lol. Smoked bad on decel smoked on accel...now that i think about it i never really didn't smoke! I really wanted to dyno it but never had to money to do it. I wanted the kid that bought it to dyno it but he dissapered off the face of the earth i think.

                        Comment


                          Just gonna toss it out there that all of this talk about 1/4 mile racing really makes me want to take the car out...

                          Comment


                            Originally posted by JGood View Post
                            You trapped over 100mph.

                            My best run was 95mph. With slicks and a 3.73 LSD. Dumping the clutch at 3k+ and zero wheelspin. Vanos m50, g260. Dinan chip, CAI, headers, 2.5" single w/ high flow cat/muffler.

                            My buddy's chipped, AA intake/exhaust 97 M3 traps 97mph.



                            I'm not saying you are lieing or anything, but something is up with that motor. It is not a typical 170-180whp m50. MPH is a function of power/weight, with little to do with driver ability (unless you really suck). There's no reason, with longer gearing and shitty tires, and a lack of vanos, that you would be trapping 5mph faster then me.
                            You said power:weight. maybe his was significantly lighter? :dunno:
                            Originally posted by rThor432 View Post
                            Just gonna toss it out there that all of this talk about 1/4 mile racing really makes me want to take the car out...
                            Can't wait to do the same. But baby steps, gotta get this bitch running/rolling on her own power first!

                            Comment


                              Naw... we already went over this. I had the tar in the trunk removed and the foam under the carpet. It was just a rediculously fun car... kinda wish I didn't sell it.
                              I just got mine rolling...too bad it is still under my power. My motor is sitting at my house and my car is sitting at my parents garage....

                              Comment


                                Originally posted by MIKe30 View Post
                                But baby steps, gotta get this bitch running/rolling on her own power first!
                                Getting close... :)

                                Comment

                                Working...
                                X