Thanks :)
Announcement
Collapse
No announcement yet.
The comprehensive DOHC engine swap thread.
Collapse
This is a sticky topic.
X
X
-
need some help with my m52 swap,
I am down to the wireing, but I have a small problem I am keeping the EWSII for $$$ reasons, I wired up the engine but the EWS is still not working been over the wires 4 times, every thing seems to be in order but still no crank.
here is how I wired it
Main EWS II 61.35-4 4 146 047
1 BLK/Yellow to starter
2 White/purple to it's brother on the connector
3 blk/green to the ignition key
4 green to DME
5 red/ yellow to continus 12V
6 none
7 brown to ground
12 black to pin 20 on the connector also black
13 light blue to transmiter
I am left with 8 black/green - ?
14 blue/red/yellow - ???
12 Black - ??? speed input I think
EWS transmiter
1 to 13 on the main EWS
2 to +12V acc on
3 to ground
Please help cant seem to start the car tryed every thing that I can think of
Comment
-
Originally posted by Janderson View PostSo what are you people using for an 02 sensor? Is anyone using the Bosch Mustang sensor?Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.
Comment
-
Originally posted by Janderson View PostWhere does this mount? It looks like it bolts to one of the intake manifold brackets, but which one, where, and what does it go to?
Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.
Comment
Comment