Anybody have problems with after market headers being too low? I just got my exhaust welded up, and everything is really low. It's about 2" off the ground low. Ugh!
Announcement
Collapse
No announcement yet.
Aftermarket Headers
Collapse
X
-
Aftermarket Headers
I got a fender roller now! LMK if you need me to roll your fenders or want to rent the tool from me locally.
Paypal: vdang5@gmail.com
Delta Auto Care
2875-C Towerview Road
Herndon, VA
703.435.1375
My Feedback Thread: Evil_TwinTags: None
-
So how would I fix a situation like this?I got a fender roller now! LMK if you need me to roll your fenders or want to rent the tool from me locally.
Paypal: vdang5@gmail.com
Delta Auto Care
2875-C Towerview Road
Herndon, VA
703.435.1375
My Feedback Thread: Evil_Twin
Comment
-
One of my buddies... But where he welded it goes straight up from there. The headers just hang wayyyyy too low.I got a fender roller now! LMK if you need me to roll your fenders or want to rent the tool from me locally.
Paypal: vdang5@gmail.com
Delta Auto Care
2875-C Towerview Road
Herndon, VA
703.435.1375
My Feedback Thread: Evil_Twin
Comment
-
So I made a bracket that pulled the headers up. It works well, and it's not low clearing anymore.
Anybody know anything about backpressure? I think I have too much, and I want to hollow out my Ansa muffler. Anybody?I got a fender roller now! LMK if you need me to roll your fenders or want to rent the tool from me locally.
Paypal: vdang5@gmail.com
Delta Auto Care
2875-C Towerview Road
Herndon, VA
703.435.1375
My Feedback Thread: Evil_Twin
Comment
-
Originally posted by evil_twin View PostSo I made a bracket that pulled the headers up. It works well, and it's not low clearing anymore.
Do your headers have a built in flex pipe or something?
Erik
Comment
-
Yah, I know they're not meant to flex. On the NEW piece I had welded I did have a flex pipe put in (not sure why though) but it wasn't flexing at the flex pipe. The pipe was sagging from the piece that connects the 2 headers to make it 1 pipe.I got a fender roller now! LMK if you need me to roll your fenders or want to rent the tool from me locally.
Paypal: vdang5@gmail.com
Delta Auto Care
2875-C Towerview Road
Herndon, VA
703.435.1375
My Feedback Thread: Evil_Twin
Comment
-
Originally posted by mazur View PostStrange...Ebay headers?
I have a set of the longtube ones and it's perfect fit.
Hey what headers do you have? I just found out that one of mine are cracked and I need to either replace or have it welded. But either way I have to take it off, so I figured I would be putting a new one on.I got a fender roller now! LMK if you need me to roll your fenders or want to rent the tool from me locally.
Paypal: vdang5@gmail.com
Delta Auto Care
2875-C Towerview Road
Herndon, VA
703.435.1375
My Feedback Thread: Evil_Twin
Comment
-
Originally posted by dpgrand View PostIt probably cracked from your "bracket"....I got a fender roller now! LMK if you need me to roll your fenders or want to rent the tool from me locally.
Paypal: vdang5@gmail.com
Delta Auto Care
2875-C Towerview Road
Herndon, VA
703.435.1375
My Feedback Thread: Evil_Twin
Comment
Comment