Announcement

Collapse
No announcement yet.

Another S52 swap... but this time with a newb!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Originally posted by jahnaboi View Post
    Is that what your running? What pipe needs to be modified?
    yep, that is exactly what i'm running. i bought this brand new:





    the pipe that is closed to the passenger will have to be tweaked slightly so that it can clear the front subframe.
    IG: deniso_nsi Leave me feedback here

    Comment


      Too bad I'm already running obd2 headers with obd1 midpipes without a cat (straightpipes) in its place. Used e30 flanges on the obd1 midpipes so I could mount the stock e30 muffler. Had to weld laying down under my car so it hangs lower than I would like it to. Gotta fix it later on.

      SINdelle:E36 M3 5-Lug | 17x8 & 17x9 BBS RS | S52/ZF | 2.93LSD/3.5HFM/24lb Injectors/C&S Chip[B]SOLD[B]

      Comment


        Originally posted by jahnaboi View Post
        Too bad I'm already running obd2 headers with obd1 midpipes without a cat (straightpipes) in its place. Used e30 flanges on the obd1 midpipes so I could mount the stock e30 muffler. Had to weld laying down under my car so it hangs lower than I would like it to. Gotta fix it later on.
        im also using OBDII manifolds and OBDI cats.

        at least you can drive the thing now!
        IG: deniso_nsi Leave me feedback here

        Comment


          Originally posted by dude8383 View Post
          im also using OBDII manifolds and OBDI cats.

          at least you can drive the thing now!
          Lol yea. I'm getting obd2 midpipes tomorrow and hopefully a stock 96-98 exhaust along with it for emissions (although its not a problem maybe it'll save me 40 bucks).

          First Kill Story:

          Driving back from Lowes getting some stuff for my girlfriends car to fix her window regulator (cable snapped) and a 2007 (or 08?) Evo MR pulls next to me then speeds up a little. I think in my head, "hrm... s52 w/ 2.93 lsd and shitting ass exhaust (obd1 midpipes with stock e30 muffler <--- so restrictive) I shouldn't try... I'll just get disappointed." So I didn't do anything at first, then we end up at a light. Go figure.

          At the light I didn't do shit, I have no traction in first nor when I rip it to second gear from first so I didn't bother trying to get a launch or do anything period. But then suddenly he floors it away then stops real quick as if he was taunting me... Again... I didn't want to disappoint myself... So I thought about it more and decided to catch up to him to see what he would do and he floors it away so I gun it after him and I notice that even though he took off early I was gaining on him ever so slightly...

          Next light he makes a left, and I decide to follow, this is where I was ever so happy. We line up and we're rolling in second, he hits it and I get on it. Bare in mind I was shifting at 6400 and scared to money shift lol. So end of second I start to pull ever so little and threw it into third gaining half a fender and then end of third probably about a fenders length ahead.

          The verdict: I was faster! YAY! LOL. Flame on me all you want, I don't condone racing anywhere but I just needed some piece of mind of where I stood with this swap. It felt oh so good to be pulling on an Evo MR. If only I had a real exhaust setup... (Ebay manifolds/AA track pipe/UUC E36 M3 exhaust <--- What I really want)... I would pull a lot harder on the guy. Boy that was fun...

          -Jasper

          SINdelle:E36 M3 5-Lug | 17x8 & 17x9 BBS RS | S52/ZF | 2.93LSD/3.5HFM/24lb Injectors/C&S Chip[B]SOLD[B]

          Comment


            Guess no one cars that I beat a 13.8 second car. LOL. Knowing that I'll free up 20 + hp with a full exhaust setup makes me even more happier. =)

            SINdelle:E36 M3 5-Lug | 17x8 & 17x9 BBS RS | S52/ZF | 2.93LSD/3.5HFM/24lb Injectors/C&S Chip[B]SOLD[B]

            Comment


              Evo MR is not a 13.8 second car first of all, more like a low 13 second car. The problem is most people don't launch the awd cars hard (I remember when I still had my awd car a few years back in autox, I used to launch it everytime at 5-6k rpm, you get just a little wheel spin and off you go) and bog them... but you did it from a roll so that doesn't matter i guess.

              Take it to a local strip, I am curious to see what you'll run.
              Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



              OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827

              Comment


                When I have money to invest in larger wheels/tires/5-lug I'll definitely hit up the strip. Only thing is the full exhaust / retuned chipped comes first.

                Since we did it on a roll, launching was irrelevant. It was all about power to weight ratios when we ran. Considering we both were of the same weight (by this I mean the driver not the car) and with no passengers it was a pretty even race.

                I've read many stock Evo MR's running 13.7 - 13.8s. I don't know if the one I raced had any mods but he did change his BOV that's for sure. Doubt he did anything else.

                SINdelle:E36 M3 5-Lug | 17x8 & 17x9 BBS RS | S52/ZF | 2.93LSD/3.5HFM/24lb Injectors/C&S Chip[B]SOLD[B]

                Comment


                  It's also about gearing, and drivers etc... That's why running against a clock is the best you can do not against another car from a roll lol. Plus you can take your car to a strip with 4 lug wheels, 5lug aren't required ;) Anyway.
                  Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



                  OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827

                  Comment


                    Originally posted by Jean View Post
                    It's also about gearing, and drivers etc... That's why running against a clock is the best you can do not against another car from a roll lol. Plus you can take your car to a strip with 4 lug wheels, 5lug aren't required ;) Anyway.
                    well said
                    84 318I Delphin RIP
                    87 325IS delphin 24v Sold
                    89 325 Alpineweiss

                    Comment


                      Psh. 5-lugs look better =P Plus I could run 17 LTW rims with 235s all around. =)

                      SINdelle:E36 M3 5-Lug | 17x8 & 17x9 BBS RS | S52/ZF | 2.93LSD/3.5HFM/24lb Injectors/C&S Chip[B]SOLD[B]

                      Comment


                        Originally posted by Jean View Post
                        It's also about gearing, and drivers etc... That's why running against a clock is the best you can do not against another car from a roll lol. Plus you can take your car to a strip with 4 lug wheels, 5lug aren't required ;) Anyway.
                        If I remember correctly an Evo MR is a 6 speed car with closer geared ratios than my zf with a 2.93 lsd. So that can't possibly be a factor. If I had a 3.25 lsd paired with my zf tranny with a full exhaust setup (ebay headers [equal lengths], aa trackpipe, uuc catback exhaust) i would have definitely walk the Evo MR hard.

                        Seems like you guys like to doubt without sufficient evidence like time slips and dyno's. No point in singing if I ain't being heard.

                        SINdelle:E36 M3 5-Lug | 17x8 & 17x9 BBS RS | S52/ZF | 2.93LSD/3.5HFM/24lb Injectors/C&S Chip[B]SOLD[B]

                        Comment


                          Ummm... pot kettle.... until you take your car to the strip and post slips it's all talk. cut the benchracing. I give you props to completing the swap fairly quickly, but this let's cut the bs.
                          Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



                          OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827

                          Comment


                            :ohsnap:
                            84 318I Delphin RIP
                            87 325IS delphin 24v Sold
                            89 325 Alpineweiss

                            Comment


                              Originally posted by Jean View Post
                              Ummm... pot kettle.... until you take your car to the strip and post slips it's all talk. cut the benchracing. I give you props to completing the swap fairly quickly, but this let's cut the bs.
                              Pot kettle? So you're calling my running against an Evo MR bs? How narrow minded you are. If you knew one thing about me, its I don't lie.

                              SINdelle:E36 M3 5-Lug | 17x8 & 17x9 BBS RS | S52/ZF | 2.93LSD/3.5HFM/24lb Injectors/C&S Chip[B]SOLD[B]

                              Comment


                                Originally posted by jahnaboi View Post
                                Pot kettle? So you're calling my running against an Evo MR bs? How narrow minded you are. If you knew one thing about me, its I don't lie.

                                Sigh...

                                Originally posted by jahnaboi
                                Seems like you guys like to doubt without sufficient evidence like time slips and dyno's..
                                running another car on a street from a roll does not make your car fast, you should take your own advice on "sufficient evidence" .
                                Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



                                OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827

                                Comment

                                Working...
                                X