This shop is going to have some disgusting projects going. And only more to come.
Announcement
Collapse
No announcement yet.
My 24v long term swap :) S54 I Love.
Collapse
X
-
historyLast edited by Wanganstyle; 12-28-2016, 11:22 AM.OBD1 M54/M52TU swap as a M50b25
Z4 non powered steering rack fits e30
Euro e46 2005/6 320d 6mt gearbox into E30 with M20 hardy and beck 1985 327s engine
Comment
-
historyLast edited by Wanganstyle; 12-28-2016, 11:22 AM.OBD1 M54/M52TU swap as a M50b25
Z4 non powered steering rack fits e30
Euro e46 2005/6 320d 6mt gearbox into E30 with M20 hardy and beck 1985 327s engine
Comment
-
ohhhhh myyyy gawddddddd
this build is gonna be titties!sigpic
^Back in the game^
BUILD THREAD: http://www.r3vlimited.com/board/showthread.php?t=201281
FS thread:
http://www.r3vlimited.com/board/showthread.php?t=214105
Comment
-
Originally posted by gobuffs View PostI won't track another S54 without upgrading the rod bolts and bearings. The mains were done for peace of mind.
I had the same question.
My last unit did not have bottom end failure when stressed to 8400rpm and 170mph OVER, often times running very "experimental" mapping.
EMS is still up in the air, I still have my Pnp Dta s100 harness which may be used, many other ideas have been floating in my reckless brain.
Hoveringuy; I will probably be consulting with you for advice (if your schedule permits).OBD1 M54/M52TU swap as a M50b25
Z4 non powered steering rack fits e30
Euro e46 2005/6 320d 6mt gearbox into E30 with M20 hardy and beck 1985 327s engine
Comment
-
Originally posted by Wanganstyle View PostConsulted my machine shop today, they said nobody they knew local had the setup to do it, they had one but was broken, may ask Elgin cams up north.
I may just fixture and dial gauge...... We will see ;)
What went wrong at 8400? I'd think 8100-8200 would be relatively safe?Last edited by nando; 08-09-2011, 08:40 PM.
Comment
-
Originally posted by Wanganstyle View PostConsulted my machine shop today, they said nobody they knew local had the setup to do it, they had one but was broken, may ask Elgin cams up north.
I may just fixture and dial gauge...... We will see ;)
Looks good. Will look better in a E30. I've been throwing the idea of a S54 around too. Still have more projects to catch up on.
Comment
-
Originally posted by surebimmer View PostTerry Tinney in Livermore can Cam Doctor your cams. Not sure if that's what your looking for.
Comment
Comment