Announcement

Collapse
No announcement yet.

Mr Lens fog light lenses

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    None in my hands but I stepped on a piece that bled like a banshee.

    RISING EDGE

    Let's drive fast and have fun.

    Comment


      #17
      yea I've isntallled these too... I fucked one install up a bit but the other came out perfect

      Comment


        #18
        They look good. Especially if on a budget.


        [THE 501 club - Founding Member]

        Comment


          #19
          So you basically break the old glass out or can you heat the fog up in the oven like a smiley? I have a set that are both cracked & look sandbalasted. Whish I had seen this thread last week. I just bought a used set for 110.00.

          Gracias

          btw

          www.mrlens.com comes up not found. anyone have a new addy or somewhere else to get lenses?

          Found a set on ebay with graphic removal/replacement instructions.

          BMW E30 3 SERIES FOG LIGHT LENS SET NEW FOGLAMP is the title.
          Last edited by parkerbink; 10-02-2005, 06:04 PM.

          [IMG]https://cimg4.ibsrv.net/gimg/my350z.com-vbulletin/550x225/80-parkerbsig_5096690e71d912ec1addc4a84e99c374685fc03 8.jpg[/IMG

          Comment


            #20
            I think the eBay ones are the US distrib. for Mr Lens, but if their site is down they probably went out of business.

            Why would you want to heat the lens off? Its not like you are going to keep them, just smash it out.

            RISING EDGE

            Let's drive fast and have fun.

            Comment


              #21
              Seems it's easier and less dangerous to take it off whole than deal with breaking it off. Mine are solid except for where the rock cracked them.

              [IMG]https://cimg4.ibsrv.net/gimg/my350z.com-vbulletin/550x225/80-parkerbsig_5096690e71d912ec1addc4a84e99c374685fc03 8.jpg[/IMG

              Comment


                #22
                TJ... if you want to get the lamin-x on without bubbles.... try using soapy water.... clean the lense... dry it and spray soapy water on both surfaces... then use a credit card/squigy (sp.) to get all the water out from under the film....

                but yah... Mr. Lense doesn't work.... who was the seller on ebay if i might ask?

                http://www.westwerksauto.com

                Comment


                  #23
                  go to BMP's website, no dealing with ebay or shady south african companies.
                  Build thread

                  Bimmerlabs

                  Comment


                    #24
                    I want to order some of these lenses, but the ones on bmps website look a bit different~

                    check it out



                    http://www.bmpdesign.com/product-exe...earch_model/37

                    are these the same ones some of you all ordered?

                    Comment


                      #25
                      the pictures are wrong, but as long as you're ordering for an E30 you will get the right ones (I got mine there).

                      I would order over the phone to be sure.
                      Build thread

                      Bimmerlabs

                      Comment


                        #26
                        Originally posted by Q5Quint
                        I want to order some of these lenses, but the ones on bmps website look a bit different~

                        check it out



                        http://www.bmpdesign.com/product-exe...earch_model/37

                        are these the same ones some of you all ordered?
                        Those look like early model fog lenses but I am not sure.

                        RISING EDGE

                        Let's drive fast and have fun.

                        Comment


                          #27
                          Those ones pictured above are E34 lenses.
                          Tenured Automotive Service Professional - Avid BMW Enthusiast

                          Vapor Honing & E30 ABS Pump Refurbishment Service
                          https://mtechniqueabs.com/

                          Comment

                          Working...
                          X