Got my 10" luke box installed today with a mtx t6104a sub I have had for years, and I am blown away by the bass I am getting. Even better, when I open the trunk with the radio on, it isn't blasting bass out. The sound is all going into the cabin, which is amazing.
To anyone hesitant, or on the fence about buying one of G.A.S.'s products: Do it! It is worth every penny for the amazing engineering, fit, quality, and sound!
Luke:
I am about to go the rest of the way with my system, and order a 5 channel amp to run the system, so I can take the load off the head unit and BP300.1 amp thats pushing the sub now, but before I do, I was wondering if you could confirm if the planet audio 1800.5 you posted a few pages back is a good match to my system:
Alpine CDA 9885 head unit
Bravox CS50K front speakers; 4 ohm (75 watt RMS / 150 watt Max)
Pioneer junk rear speakers (25RMS/140Max) - I will be replacing these with matching CS50k's once they blow.
MTX Thunder 6000 T6104A Sub; 4 ohm (250 RMS/ 500 Max)
The AC1800.5 5 channel amp lists its output as:
2 ohms: 300Wx4 + 600Wx1
Aside from the garbage pioneer rear speakers, which I will upgrade eventually, is the amp a good match for the rest of the system? Will everything else play nice together?
Disclaimer: I am useless at deciphering bridged/parrallel/2ohms/4ohms/rms/peak/trimode/etc.
To anyone hesitant, or on the fence about buying one of G.A.S.'s products: Do it! It is worth every penny for the amazing engineering, fit, quality, and sound!
Luke:
I am about to go the rest of the way with my system, and order a 5 channel amp to run the system, so I can take the load off the head unit and BP300.1 amp thats pushing the sub now, but before I do, I was wondering if you could confirm if the planet audio 1800.5 you posted a few pages back is a good match to my system:
Alpine CDA 9885 head unit
Bravox CS50K front speakers; 4 ohm (75 watt RMS / 150 watt Max)
Pioneer junk rear speakers (25RMS/140Max) - I will be replacing these with matching CS50k's once they blow.
MTX Thunder 6000 T6104A Sub; 4 ohm (250 RMS/ 500 Max)
The AC1800.5 5 channel amp lists its output as:
2 ohms: 300Wx4 + 600Wx1
Aside from the garbage pioneer rear speakers, which I will upgrade eventually, is the amp a good match for the rest of the system? Will everything else play nice together?
Disclaimer: I am useless at deciphering bridged/parrallel/2ohms/4ohms/rms/peak/trimode/etc.
Comment