Miller W.A.R. Machine

[E30Nova]

Man if I had the cash I would totally buy this. :(

[brody]

Hey Brody, have you guys looked into meth/water injection?

:twisted:...

[StereoInstaller1]

Hey Brody, have you guys looked into meth/water injection?

[E-Thirty]

Man, this is just looking better and better.

[CorvallisBMW]

surely you could sell that kit but leave out the electical stuff?

Why? The MAF conversion is probably the best/buck upgrade you can buy for this car.

You won't gain a thing from a 'cold air intake' on a stock m20, it's been proven over and over.

Brody: That kit looks awesome! If I still had an m20 car I'd be all over it like a fat kid on cupcakes.

[digger]

One step closer to shipping the first five units. Just waiting for the splash shields to arrive.

surely you could sell that kit but leave out the electical stuff?

[brody]

One step closer to shipping the first five units. Just waiting for the splash shields to arrive.

[walktheboard]

i <3 this whole thread

[brody]

Did you get that part number?

Yup, my bad it necks down, not up. The muffler we used was p/n 14816 Magnaflow.

[325ix]

Did you get that part number?

[brody]

Why not, you do for the M30?
That's a shame, you probably would have a pretty good lineup of people to buy if you did. ;)

It isn't worth sitting on the stock. We will sell more PSIK as they are than we would special ones for special circumstances.

[nando]

are you making over 200-250hp? if not then that should be sufficiant. but i understand i want 2.5 also

single 2.25" is far smaller than stock. can you say butt-plug?

[eugeman]

We will not be offering variances of the induction kit.

Why not, you do for the M30?
That's a shame, you probably would have a pretty good lineup of people to buy if you did. ;)

[brody]

WHat is required to run the smart fan? I don't run motronic will i still be able to use it?
Any idea on what the gains of this mod alone are?

What about the induction kit, will you offer one that simply bolts to the throttle body without the MAF but with the elbow and ICV mount?

Yes, the smart fan is controlled by the Motronic ECU, it will not work with a standalone at this time. The gains vary, we have seen as much as 3 to 4 HP on a naturally aspirated engine 5 - 7 HP on a boosted engine.

We will not be offering variances of the induction kit.

[digger]

WHat is required to run the smart fan? I don't run motronic will i still be able to use it?
Any idea on what the gains of this mod alone are?

What about the induction kit, will you offer one that simply bolts to the throttle body without the MAF but with the elbow and ICV mount?