Miller W.A.R. Machine

[Dark Helmet]

I booked dyno time for 9/30... I'll get results in asap... hoping initial pulls are well into the 160s... I hope the "open headers" arrangement isn't too detrimental to the tune...

[Reeves]

I'll probably do a few dyno runs as well. Depending on if I can find a good tune shop or not, and what they charge, I'll do a dyno at stock, again when I get the war chip (with AFM), and then a 3rd after I install the induction kit. But that's only IF I can find an affordable shop..

[325ix]

Man I a really want to get this now with the m30 throttle body and a full exhaust. The product looks great.

[brody]

Well we have sold out of the first 5 units before they were even officially released! Thanks guys, we owe our continued success to you, our customers!

A batch of 10 units are already in production again.

[Dark Helmet]

Man I a really want to get this now with the m30 throttle body and a full exhaust. The product looks great.

I hope to have mine on-track 10/1 here in eastern, NE... you're welcome to come take a look.

[325ix]

I hope to have mine on-track 10/1 here in eastern, NE... you're welcome to come take a look.

Would love to but your a ways a way.

[Dark Helmet]

closer than California! :D

[Denny]

Well we have sold out of the first 5 units before they were even officially released! Thanks guys, we owe our continued success to you, our customers!

A batch of 10 units are already in production again.

Hi Brody is mine part of the first 5 units? :)

Any luck finding out about the size/flow of my stock 330i injectors?

[325ix]

closer than California! :D

Yeah it is! On a side note. What muffler are you guys using? On magnaflows website there are no mufflers with tips that have a 2.5" inlet.

[BlUe E30]

Yeah it is! On a side note. What muffler are you guys using? On magnaflows website there are no mufflers with tips that have a 2.5" inlet.

look up the 14815 magnaflow thats what alot of the e30 guys are using and it i believe but dont quote me is a 2.5 in

[Dark Helmet]

mufflers??? what are those?

(srsly, weld in a bend and dump it out the side... and that's it).

[brody]

mufflers??? what are those?

(srsly, weld in a bend and dump it out the side... and that's it).

What size are those pipes, and how much actual piping is after the headers? You may be loosing more power than you can gain back with tuning.

[Dark Helmet]

down pipes are about 18", will probably add another 3 ft or so... there will be a cross-over and a step-down to about 2".

the down-pipes are WAY too big, and will likely be replaced w/ smaller ID pipes... The shorties each have a 2.0" flange...

[325ix]

look up the 14815 magnaflow thats what alot of the e30 guys are using and it i believe but dont quote me is a 2.5 in

That muffler only comes in a 2.25.

[BlUe E30]

are you making over 200-250hp? if not then that should be sufficiant. but i understand i want 2.5 also