Hey guys, I’m looking into building a 3l stroker using an m50b25 from a 93 525 and the crank, con rods, pistons and inlet cam from an m54. Here in Australia the m52 is an aluminium block, so a stroked m50 is the only iron block 3L solution. M50b25 Non-vanos are quite rare to find, however, I can get a vanos engine; aside from standalone compatibility with vanos, are there any downsides to running a vanos m50? I hope to build for 400whp.
Thanks in advance,
nick.
Thanks in advance,
nick.
Comment