Bliks Supa Chaga Build

[iXe<30]

That would be a pretty cool deal man. Only problem, depends on what blower you get. Now if you got an Eaton 207018 or "m45" i might be able to help you real easy. But if not, im gonna have to get a lot of specs from you. Go for a c230 blower they are cute (:

well since im quite the noob.... id probably just stick with the same setup asuming you have nice gains

[TheBlik]

Well we'll see in about a week. Just bought 42 lbs injectors and a 3.5 in MAF housing. Today in going to take out the radiator install new pulley delete power steering, install new thermostat, and electric fan conversion. And pressure wash the side of the block all the work is being done on, scavenge some piping and move oil cooler lines over a bit more ill try to get some pics.

[TheBlik]

so i did not get a chance to work on the car. slept all day went motorcycle riding and blew up my knee cant do anything to it till im semi mobile sorry guys :/

[TheBlik]

got my green giants. and 3.5 in maf going to attempt to install today. Don't know if you care of not. tore both acl and mcl, need surgery in two weeks.

[iXe<30]

shit. good luck with the recovery... happen on the bike? anyways excited to see progress

[TheBlik]

jumping down a hill, the back end came out to the left. bike bounced off the ground the right side came out i high sided and rolled over my knee in many fashions :/ oh well, its bolted on, ducting is on, fan is on (not working yet :x ) just need to get the electric fan working, slap on a belt and boooooooost every where.

[TheBlik]

OKIE DOKIE (: so got the belt installed and the super charger whine is great (: Only problem is, i bought the wrong MAF housing so im running a 2.7 lol. just need to swap them out and get a wide band gauge.

[TheTacoMan]

weiweoweiweiwiewoewoeioieoeioweoweiweoeowewweeeeee eeeeeeeeeeeeeeeeee

I cant wait to hear this in person

[iXe<30]

YouTube

[TheBlik]

not yet haha, need a 3.5 in maf, i bought the wrong one, so i need to get the right on and some couplers

[iXe<30]

yeah im playing.... just excited because this will determine my plans for "nikka" Also.. shifting with a bumb leg... good luck

[TheTacoMan]

Got some picture today for blik






Little guy is hiding under the oil lines.

[TheBlik]

yeah im playing.... just excited because this will determine my plans for "nikka" Also.. shifting with a bumb leg... good luck

its actually my throttle leg :) so i can drive it just hurts for to do anything haha. oh BTW going to get MRI today, see whats really wrong, and if i need my surgery, i might have to come up with some sort of funding through the r3v's, any ideas of what i could do to give out or sell to get donations? thanks guys, anyways, ill be getting 3.5 in maf monday or tuesday, along with giant couplers should be kinda running still need a wide band to fix all the bugs.

[TheBlik]

ooooooookeeeee dooookeeeee, got 3.25 in maf put it on, car idled great, same thing happened, my friend has told me to cut the WOT wire and i should be driveable. ill do this tonight and tells you guys. (:

[kamotors]

trying to help the blik diagnose why his car wont build boost. car can rev freely through out the rev range and the coupler are all swelled up at idle but it will only make it to -5psi of vacuum and is running very slow. BOV is venting so there is positive pressure I would figure.

Belt seems to slip but I'm not sure if thats the only issue