I took my car to the dyno the other day to get tuned and the oil seal on the turbo ended up blowing. The shop owner though it might be a feed that is oversized but mine is the recommended -3an and my drain is -10an.
I removed my turbo to rebuild it and my question is if the drain was not draining that would blow out the seal. When I look at the drain line it has oil in it still and it won't drain.
Here is my drain setup it
Should it drain even though it isn't running? I have my drain bung as high as I can get it on my oil pan. Also my car made 240awhp and 280awtq at 6psi before the seals blew.
Sent from my E6653 using Tapatalk
I removed my turbo to rebuild it and my question is if the drain was not draining that would blow out the seal. When I look at the drain line it has oil in it still and it won't drain.
Here is my drain setup it
Should it drain even though it isn't running? I have my drain bung as high as I can get it on my oil pan. Also my car made 240awhp and 280awtq at 6psi before the seals blew.
Sent from my E6653 using Tapatalk
Comment