How the f do i get the fuel injector clips off!!!!!!!

[jeffnhiscars]

It looks like there's no retaining clip on that leaky injector. The only other reasons it would leak are a faulty no ring or damaged fuel rail. You've never said why you pulled this all apart on a a ar that just had head work so you may want to take a a step back and do some more digging.

As for Sea Foam, I'm a little old school and have honestly never used the stuff. To my mind trying to solve this problem with it is like trying to dislodge a coronary embolism by going on a diet of Big Macs

[E30 Wagen]

Bentley manual says you supposed to replace the rubber o-rings whenever you pull the injectors; I took a chance when I did mine and got lucky they stayed dry.

[tjh1127]

These are brand new rings too. I didnt lube them that's all I can think of


Sent from my iPhone using Tapatalk

[digger]

the clips also tell you if the injector and o-ring are pressed in properly

[tjh1127]

I swapped the clips from non leaky one to leaky one and they kept leaking


Sent from my iPhone using Tapatalk

[thmpr464]

Here is a pic of my injector rail removeid with my refurbished EVO3 type injectors: took less than 45 mins to replace and up and running.

[digger]

These are brand new rings too. I didnt lube them that's all I can think of


Sent from my iPhone using Tapatalk

if clips go on then its probably pushed far enough in so it would be the o-rings damaged upon in stall or there are deposits and the o-ring cant seal against the surface