Want to do an M30 swap

[lifeiskaos]

you're wanting to cut here??:


that's scary... definitely fab some reinforcements. at LEAST a strut brace.

[Good & Tight]

you're wanting to cut here??:


that's scary... definitely fab some reinforcements. at LEAST a strut brace.

BFH no need to cut anything.

[JoeMadoo]

really? It dosent seem possible. But i trust you man, ill give it a shot... It needs to go in atleast in inch

[Spinning Tires]

BFH no need to cut anything.

Hammer will definately work. That metal is flimsy as shit right there. you can probably use a plastic toy hammer

[Good & Tight]

really? It dosent seem possible. But i trust you man, ill give it a shot... It needs to go in atleast in inch

An inch should be no problem.

[JoeMadoo]

Good place to drain?

[Danny]

Yep that'll work.

[JoeMadoo]

Team Joe motor mount brackets

[kronus]

Any reason you're not using all four bolt holes? Look sweet otherwise, better than my e30.de mounts :p

[Funkmasta]

Team Joe motor mount brackets

booyah

[Funkmasta]

Any reason you're not using all four bolt holes? Look sweet otherwise, better than my e30.de mounts :p

Definitely strong enough with just the three...

[sefb222]

powdercoat them bitches! (go ahead joe.. post em)

[JoeMadoo]

There are only 3 bolt holes in the block...

[JoeMadoo]

Progess, who needs a vacation on spring break when you got a turbo'd m30 right?











Still need fmic, injectors, and a wideband o2

[Spinning Tires]

Broken distributor cap :(
Those intake tubes look way taller in the other pic. That will prolly fit easier since the AFM isnt up there