Announcement

**lifeiskaos** · 03-23-2009, 10:15 AM

you're wanting to cut here??:

that's scary... definitely fab some reinforcements. at LEAST a strut brace.

**Good & Tight** · 03-23-2009, 02:36 PM

Originally posted by lifeiskaos View Post

you're wanting to cut here??:

that's scary... definitely fab some reinforcements. at LEAST a strut brace.

BFH no need to cut anything.

**JoeMadoo** · 03-23-2009, 03:26 PM

really? It dosent seem possible. But i trust you man, ill give it a shot... It needs to go in atleast in inch

**Spinning Tires** · 03-23-2009, 04:12 PM

Originally posted by Good & Tight View Post

BFH no need to cut anything.

Hammer will definately work. That metal is flimsy as shit right there. you can probably use a plastic toy hammer

**Good & Tight** · 03-24-2009, 09:21 AM

Originally posted by JoeMadoo View Post

really? It dosent seem possible. But i trust you man, ill give it a shot... It needs to go in atleast in inch

An inch should be no problem.

**JoeMadoo** · 03-24-2009, 02:28 PM

Good place to drain?

**Danny** · 03-24-2009, 02:38 PM

Yep that'll work.

**JoeMadoo** · 03-24-2009, 04:22 PM

Team Joe motor mount brackets

**kronus** · 03-24-2009, 04:23 PM

Any reason you're not using all four bolt holes? Look sweet otherwise, better than my e30.de mounts :p

**Funkmasta** · 03-24-2009, 04:31 PM

Originally posted by JoeMadoo View Post

Team Joe motor mount brackets

booyah

**Funkmasta** · 03-24-2009, 04:32 PM

Originally posted by kronus View Post

Any reason you're not using all four bolt holes? Look sweet otherwise, better than my e30.de mounts :p

Definitely strong enough with just the three...

**sefb222** · 03-24-2009, 06:13 PM

powdercoat them bitches! (go ahead joe.. post em)

**JoeMadoo** · 03-24-2009, 11:36 PM

There are only 3 bolt holes in the block...

**JoeMadoo** · 03-27-2009, 09:21 AM

Progess, who needs a vacation on spring break when you got a turbo'd m30 right?

Still need fmic, injectors, and a wideband o2

**Spinning Tires** · 03-27-2009, 11:36 AM

Broken distributor cap :(
Those intake tubes look way taller in the other pic. That will prolly fit easier since the AFM isnt up there

Want to do an M30 swap