Been trying to get my 91 318 running again after rebuilding the head. Original head had a crack, leaked antifreeze into number 2 cylinder. Used head off a M42 from a E36. The cams were worn and mine were excellent shape. Lapped the valves after I disassembled the head. Reassembled with my E30 Cams. Used the cam timing blocks to make sure the cams are timed to the crank. Double checked the index marks and cam timing, pin is in the flywheel index hole. Everything lines up. Replaced the timing chain and gears as they were worn to a point. Initially used the E36 gears, Resulted in a no start because i did not have the trigger for the CPS. Installed a new E30 timing gear on the exhaust cam as that is the one the sensor looks for. The intake has no sensor, so either cam gear will work. Then I found the fuel pump was inop. Replaced it have fuel at the injectors, visually confirmed with injector rail uninstalled. Reinstalled everything, still no start. Now the crazy part. If we swap the coil pack plug wires, it will start with throttle wide open, Runs terrible but it semi-starts. to me, it should not run and possibly be backfiring. I checked the coil input wires back to the ECU. Verified number 1 coil is connected to the ECU correctly. All 4 pin out correctly.
Announcement
Collapse
No announcement yet.
M42 No Start
Collapse
X
-
Are you 100% sure the cam gear is on the right way? Running badly at full throttle sounds like it's getting spark in the wrong order. Seen that before.
IG @turbovarg
'91 318is, M20 turbo
[CoTM: 4-18]
'94 525iT slicktop, M50B30 + S362SX-E, 600WHP DD or bust - updated 3-17
Comment
-
Yes, The cam gears are indexed with the center of the cams, Cams are aligned with indexing tool. Cams have the double dots facing up. Number one cam lobes are pointing to each other. I agree, It seems to be out of time but don't see how.sigpic
Steve Corbett
1983 528E Scrapped
1983 528E Sold
1984 745I
1984 325E - Sold
1989 325I Bronzit-Sold
1989 325I Zinno
1988 635CSI
Comment
-
Can you verify spark timing with a timing light?
IG @turbovarg
'91 318is, M20 turbo
[CoTM: 4-18]
'94 525iT slicktop, M50B30 + S362SX-E, 600WHP DD or bust - updated 3-17
Comment
-
check your vibration damper....ask me how I know...took me over 2 months to diagnose and turns out the VD was cracked and in two separate pieces. BavAuto has em new OEM for $100, you won't find em anywhere else for even $200
1991 318is ---230K - DD
1991 318i ---- 308K - retired
Originally posted by RickSloan
so if you didnt get it like that did you glue fuzzy oil to the entire thing?
Comment
-
Originally posted by jrobie79 View Postcheck your vibration damper....ask me how I know...took me over 2 months to diagnose and turns out the VD was cracked and in two separate pieces. BavAuto has em new OEM for $100, you won't find em anywhere else for even $200
Comment
-
Originally posted by roguetoaster View Post$100, where? Show me a link, all I see is standard pricing.
Below is my receipt, you can see the price I paid and the date...sorry guys1991 318is ---230K - DD
1991 318i ---- 308K - retired
Originally posted by RickSloan
so if you didnt get it like that did you glue fuzzy oil to the entire thing?
Comment
-
Originally posted by jrobie79 View Postouch, I just checked their website. it skyrocketed up to $520...that SUCKS.
Below is my receipt, you can see the price I paid and the date...sorry guys
If I saw it at $100 I would have picked up 3.
Comment
Comment