Possible to bolt up a ZF320 to an M20?

[hopeful]

Panici how'd this go? What parts did you end up using to fit the zf into your e30?

[Panici]

Panici how'd this go? What parts did you end up using to fit the zf into your e30?

Ended up running the G260 + M20 with an oem clutch setup and slightly lighter flywheel.

Since then swapped to an M52B28 + G260 and same clutch but using a RHD 7.5lb flywheel.

And then the current iteration is the M52B28 + ZF320, Spec Stage 3+ clutch, and the same RHD 7.5lb flywheel.


-------
So I didn't end up trying the ZF320 with the M20 as I was originally thinking about in this thread.

[hopeful]

What driveshaft did you use? Have a build thread/ details on your car? Also, how do you find the RHD flywheel??

[TobyB]

RHD = RaceHeaD out of Australia...

https://racehead.com.au/

Sometimes being punny backfires.

t

[Panici]

What driveshaft did you use? Have a build thread/ details on your car? Also, how do you find the RHD flywheel??

Used a regular manual trans 325i E30 driveshaft with the G260 behind both engines.

Now am using an E36 328i driveshaft behind the M52 + ZF320.


Build thread is in my signature and also at http://e30.panici.ca