ASK ALL WHEEL/TIRE FITMENT QUESTIONS HERE - The Official Wheel/Tire Fitment Thread
Collapse
This is a sticky topic.
X
X
-
I have a 87 325is I have 20mm adapters for my style 5's 17x8 et20 with solid offset control arm bushings. What size tire can I run the front and the rear has 12mm solid riser bushings for the subframe there for less camber. Im also running H&R Race Springs. I have roller fenders.. I plan on drifting and aggressively driving the car so NO RUBBING ALOUD!!!!!!!!! lolComment
-
Okay guys, I need to know how much spacer I need. I ordered a set of kamotors ultrawides so I'm not too worried about poke, but here's the question. The wheels I got are a 17x10 square setup with a +15 et. I already run a 5mm spacer up front to clear basketweaves on my coilovers. What size spacer will I need to fit the fronts?Comment
-
I'm looking at possibly running a set of klutch sl1's in a 15x8.5 et17 spec. What tire size would be best? Ideally I'd like to run a thicker sidewall 50/55? Thoughts? My car has the gc coilover spring kit/bilstein sports. Thanks in advance!
Sent from my iPhone using TapatalkComment
-
Comment
-
Should just squeeze by without rubbing. I'd suggest ANY tire but ASTs though, they are seriously awful.Comment
-
Not possible without both stretch and rolling. 205/45 front 225/40 rear, rolled rears.Comment
-
Ok - looking to see if I can run this set up without needing spacers on my 1989 325i with a small roll in the rear. Currently on Billy/H&R spring combo. This will probably change.
15x6.5 et 32 on a 205 tire
or
15x6.5 et 32 on a 215 tire.
I calculated max back space for 15" is 131mm and with tires about 129mm. Seems like if i ran 215's and they were really 215mm, I'd have issues. Can you confirm?
ThanksComment
-
205/45 front, 215/45 rear, rear roll. Hubcentric rings.Comment
-
90 325is with ksport coils
rear: 16x9 et20, currently running 215/40/16 with 5mm spacers.
I really want to move up to 225s on the rear, but 225/45s are laughably difficult to find. can I remove my 5mm spacer and run a 225/50 on the 16x9 without rubbing? I have some basic fender rolling done, but the 215/40s with the 5mm spacer rub with enough load.Comment
-
Comment
-
Comment
-
First off. Thank you for your input over the years.
Canadian people always helping out the homies.
Currently running 16x8 +28 offset
205/45 with h&r spring front / vogtland rears +20mm spacer (raises the car) because I drive a vert. Heavier in the back.
Question: Do you think I could run 235s all around, already have fenders rolled very professionally done. ( I like square set ups)
Thank you in advance.Mid life crisis.
Comment
Comment