Thank you
Announcement
Collapse
No announcement yet.
ASK ALL WHEEL/TIRE FITMENT QUESTIONS HERE - The Official Wheel/Tire Fitment Thread
Collapse
This is a sticky topic.
X
X
-
sigpic
Streetable poly mounts, trans mounts are here!
http://www.r3vlimited.com/board/show...ght=streetable
'94 318i
'07 335i
'11 X5
'89 325ic m30b35
-
Originally posted by RedReplicant View Post16x8 +0... what do I need to not require insane fender hackage? Is +0 too low?
Comment
-
Looking at running a set of Rota Slip Streams, 16x8 ET40. I am guessing a small spacer will be required? 1989 325I 4x100 on HR Sport springs with Bilstien Sports.Last edited by Steve Corbett; 07-24-2014, 02:57 PM.sigpic
Steve Corbett
1983 528E Scrapped
1983 528E Sold
1984 745I
1984 325E - Sold
1989 325I Bronzit-Sold
1989 325I Zinno
1988 635CSI
Comment
-
Originally posted by whitebulat22 View PostI'm thinking about some 16x8s with +20 offset on my 86 ES:
Do 225/45/16s need rolling for lowered fender clearance or covering poke or both?
Can 245/45/16s clear everything if I get adventurous?
Also thinking about 15x8 +15 wheels, would 225/45/15s work in that case?
245/45 will work if it's not low, has a high spring rate (600lb+) and with a fender roll. Rear only.
15" setup will work fine, yup.
Comment
-
Originally posted by Steve Corbett View PostLooking at running a set of Rota Slip Streams, 16x8 ET40. I am guessing a small spacer will be required? 1989 325I 4x100 on HR Sport springs with Bilstien Sports.sigpic
Steve Corbett
1983 528E Scrapped
1983 528E Sold
1984 745I
1984 325E - Sold
1989 325I Bronzit-Sold
1989 325I Zinno
1988 635CSI
Comment
-
Quick question, I am looking for a similiar stretch, going from 16x9 (215/40/16) to a 16x8. I am leaning towards a 205/45/16 to achieve a similiar look, but reading the specs on tire rack, the overall diameter appears that I will increase the overall diameter by a little bit. Not a terrible thing imo, the 215/40/16 felt a little short anyways. Does the 205 45 seem like a good move?Supatek -noun - your basic know it all
Comment
-
Originally posted by Mystikal View PostYeah, +25 is too much for a 15x8. 5mm universal spacers with longer bolts are what you need.
Comment
-
simple question, i aquired a set of bbs RC 090 8j x 17 h2 IS20 i have a 1984 325e does anyone have any pix of these on the e30? what tire size recomendations? i plan on 5 lug conversion (of course) and a lot of other mods down the road. just need feedback and weigh my options thanks guys/gals
Comment
Comment