Will distort 1/4panel. You can lightly tap on it, but it is rite up against the 1/4.
Announcement
Collapse
No announcement yet.
ASK ALL WHEEL/TIRE FITMENT QUESTIONS HERE - The Official Wheel/Tire Fitment Thread
Collapse
This is a sticky topic.
X
X
-
Originally posted by G-Man the Visionary View PostThe inside of the wheel... Not chewed off, but ground up pretty good from the strut... Strange huh?! I'm gonna wait til the rings come in and maybe try 5mm spacers.
Comment
-
Originally posted by aworthybrother View PostOriginally Posted by aworthybrother
Hi,
Can i run 20mm adapter spacer with no rubbing? My fenders are not rolled.
(Ronal LS 16x7.5 5x120 et35)
Yes, but only with 205/45 tires.
Will 205/45 x 16 tires fill the fender gap on an early vert sitting on m3 springs? Thanks
Comment
-
Originally posted by macinnis View PostHello everybody! I've got a nice set of BBS Mahle's in the mail for me for my 1990 325. The specs are 15x7 et13.
I'm looking at tire-rack and I can get the Dunlop Direzza ZII in 195/55 or 205/50 but the only high performance tire I can find in 205/55 is the Yokohama S drive.
What do you guys recommend? Any input is greatly appreciated, thanks
Thanks
Comment
-
Originally posted by D-rock View PostThank you for the help in advance.
I have a set of 3 pcs wheels and these are my options. I can change the inner barrel (would the second option be a better choice?
GC coilovers and pretty low, fine with rolling ect.
Front: E36 m3 front 5 lug swap
Rear: 318ti
17x8.5 et13
17x10 et 19
Or
17x8 et 13
17x9 et 19
Comment
-
Originally posted by dantes View PostHave some Borbet type A 16x9 +15, lowered on h&r race with bill stein sport
I'm looking to 225/45/16. Will rub or not, and what spacers will recommend?
Thanks
Comment
-
Originally posted by 6670charger View PostI have an 88 325ic that I'm looking to put snow tires on. Found a set of Mazda Miata stock steelies with tires on them that look interesting for the price, but, need to be sure the rims will fit my car. I think I've seen information somewhere indicating that rims from the Miata, and some VW cars will fit mine. Just want to be sure before I buy. They're from an early Miata based on pics I've seen of the car. The rims are four bolt 4X100's. I've attached a link to the sale posting.
Any information would be of real help.
Thanks!!
Comment
-
Originally posted by brandan38 View Posthi I have 16x9 klutch sl1 et20 on my 87 325e. they rubbing quite a bit on front caliper and strut, I've got 195/45/16 fitted at the moment. perhaps 5mm spacer for front and extended lug bolts? The rear is really tight with room would you suggest spacing it also?
cheers In advance
Comment
-
Originally posted by CLM21 View PostIm in the process of ordering custom 18x8.5 in the front and 18x10.5 in the rear to fit something like 245 & 295 tires on them with fender flares. All in preparation for an engine swap. However, the company is asking me how much clearance I have in terms of backspacing with my ground control coilovers. With lowered cars, theres issues clearing the spring/adjustment collar. Could anyone lowered with GC coilovers tell me how much backspace theyre running or how much clearance they have?
Thanks in advance.
I run those same tire sizes/diameters on my Z, due to the 135i using the 245s as rears and P-cars running the 295s there is great selection. Nice choice.
Comment
-
Originally posted by Winh View PostHey guys, so I want to fit some Varrstoen V1 4x100 16x8 +25 all around.
Going with Billy HD and probably H&R springs when I get them, as I have cut springs right now from previous owner lol. Thinking of that setup for daily driver, in Vancouver, BC but the roads are somewhat shitty.
Will I need spacers to mount them on? And has anyone else ran this setup?
Would I also need to roll my fenders? I'm hoping not to.
Thanks in advance!
Comment
-
Originally posted by Mab1957 View PostI have a set of BBS RS 005 16" 5x120 et 11. I want to try them on my stock 1992 e30 cabrio with 4x100 lug pattern. What do I need in order to mount them?
Comment
-
Originally posted by 87'325e View PostWith a stock suspension on my 87' 325e will 15x7 bbs rz et 18 sit nicely with 42dd 18mm 4-to-5 lug adapters. Or should I look into getting them redrilled. Also what would be a good tire size. Thanks
Comment
-
Originally posted by darvo View PostLate model, Ge coils, linear springs, front perch cut, 17x9 et30 square setup, this 5 lug kit http://www.r3vlimited.com/board/showthread.php?t=330653 , which adds 12mm on the front and rear stays on e30 fitment. 245/40 tires.
Possible?
Comment
Comment