wheel fell off while driving..

[sam_]

in the second pic you can kind of see the damage to the pan/shield I mentioned previously and in the third you can see what damage was done to the inside of the wheel

my buddies have some pics too so I'll post them as well!


Sent from my iPhone using Tapatalk

[McGyver]

looks like the screw that holds the rotor on isn't all the way in, which means that you couldn't get the wheel flush with the hub, therefore you could never get the lug nuts torqued properly.

well, thats my theory.

as for wheels falling off, i've had a close call before. I had just done a bunch of work and was excited to test drive the e30 and forgot to torque the wheels on the ground. so i set off with them just snug from being on jack stands. I made around the block and thought i messed up something real bad because of the terrible wobble, it's a good thing i decided to check the wheels!

[OBEY]

Holy shit man, how long have you had this car? Maybe someone tried to steal your wheels?
My buddy had this very thing happen too but, with a bit more damage to his rotor and control arm.

Best of luck to you, and I would suggest re-torquing your lug nuts whenever possible.

lol, fo realz. Someone tried to steal my wheels, but probably gave up half way 'cuz one of them came off the 405 fwy while I was omw to work at 5am doing 80mph fuuh lol.

It wasn't easy keeping that car straight, but I got skills and they're multiplying haha shiieeet.

The damage: replaced entire rear left assembly.

The lesson: always put a dash of nail polish on the side of the each lug nuts, this way if the nail polish is damaged, then you would know that someone screwed with one of your right or left nuts. That's chuuch.

[Roysneon]

lol, fo realz. Someone tried to steal my wheels, but probably gave up half way 'cuz one of them came off the 405 fwy while I was omw to work at 5am doing 80mph fuuh lol.

It wasn't easy keeping that car straight, but I got skills and they're multiplying haha shiieeet.

The damage: replaced entire rear left assembly.

The lesson: always put a dash of nail polish on the side of the each lug nuts, this way if the nail polish is damaged, then you would know that someone screwed with one of your right or left nuts. That's chuuch.

That is both the dumbest and coolest post I've seen on r3v today.

[2mAn]

I'll never forget the moment that my wheel passed me after it fell off. Now I make sure wheels are torqued

[sam_]

looks like the screw that holds the rotor on isn't all the way in, which means that you couldn't get the wheel flush with the hub, therefore you could never get the lug nuts torqued properly.

well, thats my theory.

as for wheels falling off, i've had a close call before. I had just done a bunch of work and was excited to test drive the e30 and forgot to torque the wheels on the ground. so i set off with them just snug from being on jack stands. I made around the block and thought i messed up something real bad because of the terrible wobble, it's a good thing i decided to check the wheels!

hmm I'll look into that! it definitely sounds possible just not sure if that locking pin is popping out due to the loss of wheel and the obvious damage it did the the inside of the bottle cap

thanks for the input though!! much appreciated


Sent from my iPhone using Tapatalk

[TobyB]

the screw that holds the rotor on isn't all the way in, which means that you couldn't get the wheel flush with the hub, therefore you could never get the lug nuts torqued properly.

This. Twice, from the look of the wheel.

Actually, it was torqued properly, initially, but the screw head milled its way into the
wheel, and that loosened the bolts- then they did the rest on their own.

Watched it happen to a Pro3 car at PR last summer- a front- runner who doesn't
change his own wheels, even...

t

[3vilE30]

Almost had the rear passenger side wheel come off if I didn't catch the backed out bolts in time! Had this strange clunk at low speeds thought nothing of it cause my rear shock mounts are already gone to crap and same with the all the bushings back there. Jacked it up and nothing checked the diff nothing. Luckily I decided to go around and re-torque all the lugs.

[JinormusJ]

Remember the first time I put spacers on the rear and my rear bottlecap flew off into the forest on an old abandoned road.

Had to do the same exact thing. Jacked the car up by the fender to get the wheel under the rear hub to hold the car high enough to get to the rear jack point; then moved the jack to the jack point to mount the spare

[sam_]

This. Twice, from the look of the wheel.

Actually, it was torqued properly, initially, but the screw head milled its way into the
wheel, and that loosened the bolts- then they did the rest on their own.

Watched it happen to a Pro3 car at PR last summer- a front- runner who doesn't
change his own wheels, even...

t

hmm

so you think then to tighten the that Allen screw pin whatever it is lol and then get the lugs torqued on?


Sent from my iPhone using Tapatalk

[jeffnhiscars]

I heard a growling noise after just having replaced the rear tires on my 911. Got out to check and after another block or 2 it got so bad I had to stop. Porsche road side assistance was giving me a song and dance when my daughter pointed to a lug bolt just sitting in the rim. Seems the tire numb nuts didn't tighten them and Porsche did not include a spare with these cars so no lug wrench.

I actually pulled in to a nearby Volvo dealer to bum one...and gave them a good laugh at "those German cars"

[TimbyMaTombo]

I got kinda lucky last week. I noticed I was missing a lug when I was half way home so I just made sure the rest were tight but a couple days later, two of the three remaining snapped in half and the wheel started wobbling around but I could only put one lug in due to half of the other lugs being in.

I drove it slowly, with two lugs, to my friend's house and was able to get it fixed the next day.

[cgk_iii]

This happened to me once in my old bronco. Scary shit. Walked for about a mile picking up my stranded lug nuts in the street.. Good thing you're ok

[Northern]

The lesson: always put a dash of nail polish on the side of the each lug nuts, this way if the nail polish is damaged, then you would know that someone screwed with one of your right or left nuts. That's chuuch.

Nail polish? Ever heard of torque seal?

[Vivek]

hmm

so you think then to tighten the that Allen screw pin whatever it is lol and then get the lugs torqued on?


Sent from my iPhone using Tapatalk

I would take off the rotor (need to remove the caliper and bracket) and inspect the threads in your hub. If they're damaged your lugs will work themselves loose again.