little do they know...
-
;)Comment
-
Comment
-
You just haaaaad to start without me. Weaksauce brah. :jk:Comment
-
Wait you're doing it in a backyard, with real tools? You've gone soft.
Comment
-
-
congrats nate
Comment
-
Street? You must mean in the back of a Caltrain parking lot.Originally posted by Cabriolet View Post
Excited for this, though.sigpic
Always chasin'Comment
-
I love this thread. That is all.
Comment
-
I almost want to tow it to a caltrain station and finish the swap just because of this :rofl: but around these parts I would get rolled on quickly :(Originally posted by canakami View Post
Herro Z3 rack
In the car
We may have consumed some beer
New throttle cable
Did I mention we had some beer?
Comment
-
'twas a good night.
though we're out of beer now.Comment
-
We must know whats going in!
S50'd
Originally posted by TDE30Originally posted by slammin.e28Comment
-
I always liked you're work. Although everyone is right, it was really entertaining seeing the places you work on your car. Hopefully you can make it to the picnic this year.Comment
-
Prepare to be disappointed :p just another placeholder.Originally posted by Lof8 View Post
The Z3 rack doesn't accept E36 locking plates
So I grabbed some red loctite(ish)
New Lemforder tie rods, old boots were in good condition though
A little easier with the motor out of the car
Few parts :)
New motor
New RMS
New WP.
Old trans off
Old motor
22 socket to keep the crank steady
Clutch/FW off
Clutch is still good
Pressure washed E34 oil pan
Off the motor
E34 suction tube
E36 windage tray and suction tube on the new motor... have to remove these
Done
Oil pump nut... reverse thread!
New pan gasket
Flywheel and clutch on... eyeballed the alignment, good enough
In car
Comment
-
that's a lota beer.
gl on the rest of the build
not going ZF?Much wow
I hate 4 doors
Comment
Comment