When I changed my clutch recently I also had to pull the driveshaft. I was able to get to the rear nuts with a regular wrench. I also had an impact gun which quickly zipped off the bolt.
Also, to remove the driveshaft, I had to unbolt the front guilbo, unbolt the center support bearing, and unbolt the rear u-joint just to be able to manuver the driveshaft out. There just wasn't enough slide in the slip joint to be able to just remove the front guilbo. Hope that helps.
Also, to remove the driveshaft, I had to unbolt the front guilbo, unbolt the center support bearing, and unbolt the rear u-joint just to be able to manuver the driveshaft out. There just wasn't enough slide in the slip joint to be able to just remove the front guilbo. Hope that helps.
Comment