Kamotors E30-Turbo to ITB M20

[Bimmer_man]

Are you adding a turbo soon?

[kamotors]

Are you adding a turbo soon?

trying to get the car as good as it can be N/A first, then add boost. SO basically after this 150lbs is out I'll likely add boost.

[Bimmer_man]

Nice. Let me know where you get a manifold made I'm going to need one myself soon enough for my ix.

[kamotors]

Nice. Let me know where you get a manifold made I'm going to need one myself soon enough for my ix.

I may just sell the ITBs to fund the turbo setup

[kronus]

lexan windows

[amcp]

you can lose 10lb moving the battery to the front right side tray under the hood. Same place BMW put it in the verts.

[Bimmer_man]

Don't sell the itb set up man. Do that with the turbo. That would just be bad ass.

[CorvallisBMW]

Li-ion racing battery, 17lbs: http://www.jegs.com/i/Braille+Auto/1...xFVRoCiSvw_wcB

[kamotors]

Li-ion racing battery, 17lbs: http://www.jegs.com/i/Braille+Auto/1...xFVRoCiSvw_wcB

yes that is the exact battery I'm using a few posts up, but I paid less

[LJ851]

Li-ion racing battery, 17lbs: http://www.jegs.com/i/Braille+Auto/1...xFVRoCiSvw_wcB

I see your light battery and raise you even more cranking amps @ a feathery 3.25 lbs.

https://www.pegasusautoracing.com/productdetails.asp?RecID=12590

Prob overkill for a M20, so you can go to the 20 cell model with 600 cranking amps @ 2.65 lbs for maximum effect.

https://www.pegasusautoracing.com/productdetails.asp?RecID=12589

[TheTacoMan]

I see your light battery and raise you even more cranking amps @ a feathery 3.25 lbs.

https://www.pegasusautoracing.com/productdetails.asp?RecID=12590

Prob overkill for a M20, so you can go to the 20 cell model with 600 cranking amps @ 2.65 lbs for maximum effect.

https://www.pegasusautoracing.com/pr...sp?RecID=12589

We had those at the Motorcycle shop I used to work at, very light batteries. Work really well from what the racing guys told me.

[CorvallisBMW]

2.65lbs? Damn son...

[pandaboo911]

Cut out the spare tire well? Weld in flat piece of sheet metal

[IronFreak]

cut out the spare tire well? Rivet in light gauge aluminum

ftfy

;D

[CorvallisBMW]

Cut out the spare tire well? Rivet in thin sheet of CF

ftfy again

;D