Nice I thought you made that auto work for you :)
Kamotors E30-Turbo to ITB M20
Collapse
X
-
-
Looking good buddy! :DComment
-
I've fixed the AFR up a bit past 6200rpms so it should be up a bit more at 7k now, my spool up AFR is a bit rough but I'm really not sure as to why my turbo spools that late. Its the equivalent to a gt35, I get some boost by 3300rpms but not full until around 5500rpms. so its really not much better that the holset I had.
its fine with the 3.73 since my revlimter is at 7300, I easily make 60mph in second gear by 7k.
7speedshop.comComment
-
added 4 degrees of timing to first gear load areas above 2800rpms and below 5k rpm at loads around 80kpa and below but above 30 kpa and I now get 5 psi in first at around 5k which is almost an entire 1000rpms sooner in first gear.. Sooo basically huge improvement, a little lean under light cruising but that will be fixed soon.
so basically my late spool was a big timing issue, it felt very "flat" before but now it feels peppy and very responsive in on and off throttle situations, should be pretty killer for auto-x.
and I need to get a video for you guys, I've never heard another turbo e30 make this insane sound, my down rev past 6k sounds similar to an e46 m3.
its that glorious bmw race car rasp that my car lacked.
7speedshop.comComment
-
nice work!FS NY: two Audiobahn A235HC amps and audiobahn 1farad capacitor
Saab/GM tech2 programming
My for sale thread
1990 325iX for sale or part out
Did you buy something from me? Please leave feedback!
Originally posted by K20RI_211And I have to ask if you make a hobby out of thread-bombing with retarded questions?Comment
-
I wonder what 23psi will put down with the new head?! ;)1988 E30 335i - 1987 E30 327i - 1987 E30 327iS Pickup - 1973 2002 Project
Visit www.BimmerHeads.com for all of your 12 valve needs!Comment
-
Very impressive... Can I ask what you did for the oil filter and oil cooler lines?The Great Big M20 Timing Belt DIY
Some good information I've found online (no affiliation):
Turbo Tech (Garrett)
Four-cycle information and cam properties for beginners (ISKY Racing Cams)Comment
-
quick video from a friend, don't know if its viewable to all.
Last edited by kamotors; 04-07-2013, 02:16 PM.
7speedshop.comComment
-
-
Sweet baby Jesus! That pull!I Say... that is some awesome shit!
'86 325e- (parts car)
'89 325i- DD and project aka "Shirley"
Progress thread for ShirleyComment
Comment