If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Happy 3/25 day! Took this photo 4 years ago today while at the Mint 400. Idk if he ended up finishing, we passed him on the first lap broken with the hood off
I currently am looking to build in this same direction. I have an 86eta sedan here in Mesa. Ive thought about it and resear hed some parts, but just realized you've been building one 20min away. Thats a trip.
I need all new suspension components on this car so i figure its a good time to modify.
Any info or direction on the e46 CA swap would be much appreciated. Im lost on what to do about the CA bushings.
I'm also super curious to see your strut spacer. I have thoroughly racked my brain trying to come up with a reasonable alternative to a spacer.
You want to swap 5 lug from a E36 on your E30 so you need this kit to replace your caster ( put the wheel centered to the front fender ).
i literally bought a 2 in lift spacer for the front of a f150 for like 40 bucks both sides and drilled new holes to match an e30 front strut tower. its just two piece of 1/4 plate and .120 wall pipe in between. also easy to make at home which is what i did in the back.
Anyone still here? Been a few years. In the process of building another one. Had sold both cars and eventually bought the lowered car back after 3 owners. Plan is just to build it the exact same as the last one since it worked great. Sent from my iPhone using Tapatalk
Comment