S38 turbo e30 Hartge H35-24 H bomb

[moatilliatta]

The ball joints don’t press out. But Dorman makes some reasonably priced ones I’ve had good luck with. BMWCCA CR actually require you to replace them I think every 2 years on race cars as they are known to break with a lot of use.

[e30m3s54turbo]

I bought some used aluminum control arms for 100 bucks. I going to have the ball joints pressed out. If they crack. Buy new ones for $$$$.

[e30m3s54turbo]

I like the idea of the garagistic aluminum CABs but I've heard a few people can't get the bolts to line up

They are right about lining up. I had to hand tighten. Then I used a ratchet on it. I slowly tighten it up. It bolted up.

[Northern]

I like the idea of the garagistic aluminum CABs but I've heard a few people can't get the bolts to line up

[e30m3s54turbo]

I been working on the down pipe. I had to order some Garagistic control bushes. I need to make sure I have room for aluminum Mason X brace.

[e30m3s54turbo]

I been working on the down pipe. I had to order some Garagistic control bushes. I need to make sure I have room for aluminum Mason X brace.

[e30m3s54turbo]

I ordered a 4 gauge 4x52 for e30. I want to order oil pressure and temp.

[e30m3s54turbo]

All the goodies. Thought about doing a Milspec engine harness with a higher tier standalone? I’ve had to do a lot of work on a restoring old harness recently. Something to match the build? :)

Yes goodie’s.
I been reading on your build. Keep up with the awesome work!!

[moatilliatta]

All the goodies. Thought about doing a Milspec engine harness with a higher tier standalone? I’ve had to do a lot of work on a restoring old harness recently. Something to match the build? :)

[e30m3s54turbo]

Here is what I’m adding to pedals.

[e30m3s54turbo]

I like how it came out.

[e30m3s54turbo]

I been cleaning carpet. I decided to darken the carpet.

[e30m3s54turbo]

This is how mine came out lol, such a long process as it was my 1st time using bondo in general. I haven't lived with it yet as im doing an overall project on the car but its just about complete but I believe I like how it came out

You know the process…😅 I’m pleased how it came out on mine. It had 19 cracks. If I find a e30 dash with one or two cracks it will be a piece a cake.

Do you a pic of your dash?

I ben cleaning carpet to paint graphite on it.

[e30m3s54turbo]

This is such a nice build; on another note what is happening to your hartge cars?
thanks,
jm

Hi John.
Thanks…
still have the other projects.
On H23 cam I’m not sure what size they used. I would have to look into it.

[Garrick2007]

I took my dash out to experiment how to repair. I read on how someone on r3v repaired his dash in 2012. These days on the dash’s for a used dash with no cracks cost $600-$1000.
I’m my experience on repairs. I would recommend a dash with one or two cracks.

This is how mine came out lol, such a long process as it was my 1st time using bondo in general. I haven't lived with it yet as im doing an overall project on the car but its just about complete but I believe I like how it came out