S38 turbo e30 Hartge H35-24 H bomb

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • e30m3s54turbo
    replied
    Click image for larger version

Name:	IMG_3461.jpg
Views:	223
Size:	210.3 KB
ID:	10153164
    I was able to wet sand front fender. It came out very good. I started to polish the side skirt. I realized the passaged skirt was never wet sanded. I also wet sanded it. I bought a Big kid block’s sanding blocks to get straight panels.
    I was going back to silver e30 to prep Hartge wing. It has a lot small cracks on it.
    Attached Files

    Leave a comment:


  • e30m3s54turbo
    replied
    I been still working on my red Barron. I’m trying to finish on paint. I had to redo my front passenger fender to paint. On the edge of fender when I was wet sanding went through to primer. Click image for larger version

Name:	IMG_3201.jpg
Views:	250
Size:	297.6 KB
ID:	10153148

    Leave a comment:


  • e30m3s54turbo
    replied
    Click image for larger version

Name:	IMG_3396.jpg
Views:	246
Size:	214.9 KB
ID:	10152732 Click image for larger version

Name:	IMG_3399.jpg
Views:	243
Size:	191.5 KB
ID:	10152733 Today I was glad to finish intake. I need a new Hartge badge. I will install maybe Tuesday.. Once I finish engine bay. Put the e30 back together. While I was waiting on pain to dry. I was working on the silver e30 to sand on body.

    While I was waiting on paint and primer to dry. I went on silver car to sanding. Click image for larger version

Name:	IMG_3395.jpg
Views:	264
Size:	186.5 KB
ID:	10152734
    Attached Files

    Leave a comment:


  • e30m3s54turbo
    replied
    Click image for larger version

Name:	IMG_3378.jpg
Views:	209
Size:	234.6 KB
ID:	10152700 Click image for larger version

Name:	IMG_3384.jpg
Views:	217
Size:	217.8 KB
ID:	10152699 On Friday I took off the intake to repaint. I bought a can to help remove the old paint. I still had to use wire brush on my drill.
    Click image for larger version

Name:	IMG_3383.jpg
Views:	247
Size:	251.5 KB
ID:	10152701

    Leave a comment:


  • e30m3s54turbo
    replied
    Click image for larger version

Name:	IMG_3374.jpg
Views:	231
Size:	250.3 KB
ID:	10152551 I pulled the valve cover off to sand to polish and paint. It came out fine for me. I also pulled the intake off to paint. Click image for larger version

Name:	IMG_3352.jpg
Views:	250
Size:	205.2 KB
ID:	10152552
    I was able to polish Hartge strut bar. I hope this Saturday I can take my parts to get cad plating and get my OZ bolt chromed.

    Leave a comment:


  • e30m3s54turbo
    replied
    Click image for larger version

Name:	IMG_3350.jpg
Views:	211
Size:	366.1 KB
ID:	10152219 On my e30 hood I want to cad plate the rear bracket .I paint them the bracket it will scratch the paint. At least the cad plating will last longer. I found a place not to far from me in Oceanside.
    I might starting to remove s38 valve cover to paint and polish fins and also intake this week

    These are the parts I want to cad plate and hard ware.
    Click image for larger version

Name:	IMG_3332.jpg
Views:	276
Size:	219.6 KB
ID:	10152217 Click image for larger version

Name:	IMG_3360.jpg
Views:	191
Size:	263.2 KB
ID:	10152218
    I started to fit the front end. I’m waiting on hardware to get things bolted up. I missed placed the original hardware.


    Leave a comment:


  • e30m3s54turbo
    replied
    Click image for larger version

Name:	IMG_3322.jpg
Views:	107
Size:	182.5 KB
ID:	10152005 I got to do painting in engine bay. It did not come how I wanted. It looks better in my opinion. I want to cad plate some parts and bolts in yellow zinc. Click image for larger version

Name:	IMG_3330.jpg
Views:	124
Size:	162.3 KB
ID:	10152004

    Leave a comment:


  • e30m3s54turbo
    replied
    I wish I knew how paint years ago. I would have liked to paint the engine bay before I installed the s38. It was a pain in the ass to install with tranny bolted to it. I did it all by self. Now I’m trying to paint engine bay. I will be welding e30 vert braces to strut towers.

    Click image for larger version

Name:	IMG_3299.jpg
Views:	196
Size:	227.4 KB
ID:	10151877

    Leave a comment:


  • e30m3s54turbo
    replied
    While I’m waiting on red Barron to dry and wet sand. I started in silver e30 project. I took pics of dents with blue tape marking area for reference. Click image for larger version

Name:	IMG_3197.jpg
Views:	154
Size:	231.6 KB
ID:	10151405

    Leave a comment:


  • e30m3s54turbo
    replied
    Here pic splitter having a run on clear. I got a razer blade to scrape the high points of clear so I can wet sand it.Click image for larger version

Name:	IMG_3232.jpg
Views:	201
Size:	279.3 KB
ID:	10150640
    Attached Files

    Leave a comment:


  • e30m3s54turbo
    replied
    I was able to get bumper on the red Barron. I think I will paint under tray with gloss.
    Click image for larger version

Name:	IMG_3236.jpg
Views:	162
Size:	300.7 KB
ID:	10150532

    Leave a comment:


  • e30m3s54turbo
    replied
    Click image for larger version

Name:	IMG_3191.jpg
Views:	206
Size:	158.3 KB
ID:	10150051 Click image for larger version

Name:	IMG_3190.jpg
Views:	169
Size:	186.9 KB
ID:	10150052 Click image for larger version

Name:	IMG_3189.jpg
Views:	134
Size:	218.5 KB
ID:	10150053I

    I was able to wet sand the front m3 bumper. It came better than I thought. I’m working on the Evo III splitter to paint glossy black paint.

    Leave a comment:


  • e30m3s54turbo
    replied
    Click image for larger version

Name:	IMG_3146.jpg
Views:	183
Size:	181.4 KB
ID:	10149878 Click image for larger version

Name:	IMG_3148.jpg
Views:	122
Size:	219.5 KB
ID:	10149879 Thanks Simon.

    It getting close. I have owned for 25 years. I only drove once in 1999 in east LA when my friend was trying to sell it to me for 8k with a s14 motor at the time. Click image for larger version

Name:	IMG_3147.jpg
Views:	147
Size:	303.0 KB
ID:	10149880

    Leave a comment:


  • 2mAn
    replied
    Treat yourself Raul! I want to see this thing finished!!

    Leave a comment:


  • e30m3s54turbo
    replied
    Click image for larger version

Name:	IMG_3070.jpg
Views:	128
Size:	281.0 KB
ID:	10149836 Click image for larger version

Name:	IMG_3071.jpg
Views:	128
Size:	245.8 KB
ID:	10149837 Click image for larger version

Name:	IMG_3069.jpg
Views:	125
Size:	241.9 KB
ID:	10149839 Click image for larger version

Name:	IMG_3069.jpg
Views:	144
Size:	241.9 KB
ID:	10149838 Click image for larger version

Name:	IMG_3076.jpg
Views:	150
Size:	256.4 KB
ID:	10149835 I am all most finished with the car. I just need to finish bumper and maybe hood. On the hood I’m thinking of buying a carbon fiber hood from Turner Motorsport that ways 12lbs and cost $2,800. I might buy for my Xmas present for my self.
    Attached Files

    Leave a comment:

Working...