S38 turbo e30 Hartge H35-24 H bomb

[e30m3s54turbo]

I been researching on rear subframe bushings. I was going to use AKG 95a subframe and red 75d controller arms. I wanted oem bmw solid diff bushings. I can’t find them. I recommend from by Ryan C to buy AKG. Im going to order this week blue 85a subframe and daul diff mounts.
I worked on removing the rear end suspension. I disconnected everything. I had a hick up on drive shaft. I will need to remove it this week this week.

[e30m3s54turbo]

I had my friend Maro come this to help me with the blk M car.
He diagnosed four problems on the m88/3 motor. The intake boots were cracked, the white relay to ecu was bad, the Nology 8mm were spark plug wire in bad shape after 20years and I had two injectors were not working. Maro tapped the with a screwdriver. He got them to work. I ordered a new set of injectors.

[e30m3s54turbo]

I wanted to see how much camber I needed to clear from out side fender. I went under the to see how much room from tire to shock. I have a 13mm of clearance. That gives me good news I can clear away from out side fender. So The AP caliper are close to Hartge spokes. I still feel confident they will not rub.I finish up on the AP brakes on rear before I take the rear subframe off
to put on bushes and add adjusters.

[e30m3s54turbo]

This weekend I will be removing my rear subframe to modify and install AKG bushes and serateted camber and toe adjusters. I will have my friend son weld the adjusters on. I also finish my AP brake kit.

[e30m3s54turbo]

QUOTE=moatilliatta;n10127911]Are you going to run rear adjusters?
[/QUOTE]

Yes I plan to use adjusters.
I bought condor Delrin adjustable bushes. I decided after talking to Ryan Castro. I going with adjuster on subframe. I going to have friend Drew weld them on. He welded my motor steel mounts. What I order for the red Barron I don’t use I will pass it to my other e30’s.

You posted this on suspension Z3 bushes. I like diff cover they offer but not the price.

https://stim.tech/product/e30-rear-trailing-arm-spherical-bearing/

[moatilliatta]

Are you going to run rear adjusters?

[e30m3s54turbo]

Today my friend Maro came over to help on my early e30’s.Hi cars are stock.
my friend came over to help me on red and black m cars. I had a short on the red car. on red car was the rear taillights on right side. It was the euro right side back pedal. It was making grounding out and blowing fuses.
Then he help troubleshoot the blk car. After testing everything. It was the ecu white relay and the intake boots were cracked and leaking vacuum air. I went on line to order those items.
My friend wants to give him a ride on blk car.

[e30m3s54turbo]

What tires and spring rate are you running?

What rear adjusters?

17x40x235 front 275x40x275 rear RA1 Toyo
spings in front I think 525lbs and rear 700lbs.

[moatilliatta]

What tires and spring rate are you running?

What rear adjusters?

[e30m3s54turbo]

Nice, I always like those tips.

Thanks.

I need your expertise on e30 suspension. I have GC coil overs kit.
what rear control arms bushes and subframe?

[moatilliatta]

Nice, I always like those tips.

[e30m3s54turbo]

I
I was going to use a two 2” outlet pipes. It felt I was going to restrict air flow from 3”. I decided to use two 2 1/4” piping. It gives me at least 4” breathing room.

[e30m3s54turbo]

I spoke to Ryan C about performance rear bushes. He recommended AKG motorsports or Condor Speed Shop bushes.

I received new GC for my silver e30. I’m going to have friend of my to come over to help me on silver e30.

[e30m3s54turbo]

I still working on rear AP brakes.

I am looking into rear camber adjustments what do some of you guys recommend? I would appreciate knowledge and experience.

[e30m3s54turbo]

I received my AP calipers and brake pads. I hope everything is going to fit. I will need to get a new steel braided lines that will fit correctly.