Announcement

Collapse
No announcement yet.

Back in Black (now with s50 and bags)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #91
    I'm so close guys just need some wiring help.

    I don't have anything from my harness to connect to my starter solenoid relay (male fitting on starter). So what exactly do I do?
    Instagram: @dillonmakar

    Build thread HERE

    Comment


      #92
      subbed for the answer!
      .................................................. ...................sigpic
      .................................................. ............................. ......M50B25 3.1L stroker

      Comment


        #93
        Still haven't gotten it to start.

        I have spark and fuel is going into the rail but the injectors aren't firing. I'm assuming it is something electrical because there is no way all six of my injectors are bad.
        Instagram: @dillonmakar

        Build thread HERE

        Comment


          #94
          Are you using an E34 or E36 harness? On my E34 harness I had the same issue because the injector power cable is run to some post on the bottom of the thing that holds the 3 relays. Moved that to the power post in the bay and it fired right up.

          Comment


            #95
            nice. Can't wait to see the end result
            95 7.1L 16V E36 M3
            Motorsport Hardware ***Wheel studs and Spacers!!!--->FOR SALE 4/5 Lug Stud Conversion Kits available CLICK HERE
            LIKE my Facebook Page! CLICK HERE

            Comment


              #96
              Originally posted by JCarp90 View Post
              Are you using an E34 or E36 harness? On my E34 harness I had the same issue because the injector power cable is run to some post on the bottom of the thing that holds the 3 relays. Moved that to the power post in the bay and it fired right up.
              Pretty sure it's an e36 harness. I do have an extra cable that runs down near the starter. Is that the same one you are talking about? I checked to see if it was a hot wire though and it wasn't.
              Instagram: @dillonmakar

              Build thread HERE

              Comment


                #97
                Originally posted by dillon7 View Post
                Still haven't gotten it to start.

                I have spark and fuel is going into the rail but the injectors aren't firing. I'm assuming it is something electrical because there is no way all six of my injectors are bad.
                your fuel line are on backwards.

                I do this everytime i put a 24Valve into a car. its tradition now. With the exception of when i put my S50 into my car, i managed to get it right.
                1985 325e M50TU(Sold)
                1991 318is Slicktop (Sold)
                1990 325is Brilliantrot S50/5 Lug Swapped.
                1992 525i Manual shitbox Winter Beater

                Comment


                  #98
                  Originally posted by TimKninja View Post
                  your fuel line are on backwards.

                  I do this everytime i put a 24Valve into a car. its tradition now. With the exception of when i put my S50 into my car, i managed to get it right.
                  Yeah I had them backwards at first but I fixed them and they injectors still aren't firing.
                  Instagram: @dillonmakar

                  Build thread HERE

                  Comment


                    #99
                    Damn it. Sounds exactly like what happened to me and it was that power wire. Check the wires coming back from the injector harness then because they have their own like power wire. Like I said on the E34 harness, there was a little read wire with a connector on it that bolted to the under side of the deal that holds the 3 relays.

                    Other than that, I can't really speculate as I never wired a harness adapter. I cheated and bought a treehouse adapter.

                    You know what you need to do is stare at the car quietly for like 5-10 minutes. Let all frustration go. Go to Chipotle, get your delicious burrito and sit down and just think quietly. Give it a couple minutes and it will come to you. You will feel like a total idiot though because it's going to be something so small..

                    Comment


                      Originally posted by JCarp90 View Post
                      Damn it. Sounds exactly like what happened to me and it was that power wire. Check the wires coming back from the injector harness then because they have their own like power wire. Like I said on the E34 harness, there was a little read wire with a connector on it that bolted to the under side of the deal that holds the 3 relays.

                      Other than that, I can't really speculate as I never wired a harness adapter. I cheated and bought a treehouse adapter.

                      You know what you need to do is stare at the car quietly for like 5-10 minutes. Let all frustration go. Go to Chipotle, get your delicious burrito and sit down and just think quietly. Give it a couple minutes and it will come to you. You will feel like a total idiot though because it's going to be something so small..
                      haha best advice I've got.

                      But a slight update. I have signal 12v going to the injectors so I'm getting signal. I tried to test the injectors by using a battery and i still couldn't get the injectors to fire.
                      I'm starting to think my injectors are bad but I just can't bring myself to believe that somebody sold me bad injectors.
                      Instagram: @dillonmakar

                      Build thread HERE

                      Comment


                        Originally posted by dillon7 View Post
                        haha best advice I've got.

                        But a slight update. I have signal 12v going to the injectors so I'm getting signal. I tried to test the injectors by using a battery and i still couldn't get the injectors to fire.
                        I'm starting to think my injectors are bad but I just can't bring myself to believe that somebody sold me bad injectors.
                        I also feel like the likelihood of all 6 being bad is pretty slim. And yeah I didn't realize you had power at them. Good luck man.

                        Comment


                          Well, tested all 6 of them and even had a mechanic come double check and we couldn't get them to open. I guess some how all 6 are bad which is really odd...time to buy some new ones.
                          Instagram: @dillonmakar

                          Build thread HERE

                          Comment


                            Originally posted by dillon7 View Post
                            oh and here is a little tease of what is coming


                            Originally posted by SpasticDwarf;n6449866
                            Honestly I built it just to have a place to sit and listen to Hotline Bling on repeat.

                            Comment


                              IT RUNS!!!!!!


                              Full update coming soon
                              Instagram: @dillonmakar

                              Build thread HERE

                              Comment


                                Originally posted by dillon7 View Post
                                IT RUNS!!!!!!


                                Full update coming soon
                                Was it the injectors?

                                Congrats!

                                Comment

                                Working...
                                X