[Entropy] - E30 Hiatus cont - More seeing, less wrenching.

[moatilliatta]

June 2020 - CONT

Workin

S14 rod bearings










A 750iL ready to go home


Ye M54




Original motor had some titanium honda valves and some cut valve guides from port work get seized up. Block back from machine shop, ready to finish assembly, chain guide is machined terrible, 2 weeks Germany for a Genuine unit.


Holes cockeye'd BS


CAE's


Morimoto E46 projector retrofits




Strait pipes! Will have 2 systems depending on sound requirements






Finishing up muffler box




stoked about the hanger


Something you don't see every day going down the highway, Luckily no fire for my amigo.


A day in life.

[moatilliatta]

JUNE 2020 - Cont

Our Zakspeed.us AER Racecar - #387 - June double hitter - Off to NJMP
Special appearance by Johan Schwartz!

https://www.instagram.com/p/CCtlxGUl52o/

https://www.facebook.com/ZakspeedUS/posts/1506991216138278

The old, I forgot my cool shirt trick


What a Fucking Machine!








Rainy weather


Nice weather


I ant try'n to vanning or nuthing


Mustard drop bottom blow out shenanigan's







Good weekend, Good to reconnect.

[moatilliatta]

June 2020

Defiantly no progress on Lachs, The AER events are stacking up as they were canceled for a few months. Heavy work load and race events = No time for Lachs.

Our Zakspeed.us AER Racecar - #387
Final prep for nelson ledges


Nelson ledges

https://www.instagram.com/p/CBJv8AjlUEd/

https://www.facebook.com/ZakspeedUS/...2215349615865/





Some spectra premium fuel pump issues capped out fun race, but luckily out and back for the big day.


Problem?




TBC

[moatilliatta]

May 2020

Our Zakspeed.us AER Racecar - #387

Getting a "Blue printed" Replacement Y pipe and prepped up for Nelson Ledges




Workin
#726 Coming along


Dimpled


Windshield Brace


Interior going back "together"


S54 E36 Wrapping up
Used the evo stand offs on teh BW splitter to get it closer to the ground. Needed a new lip


Crushed carbon, NO GOOD




<3 Syncro Design work goodies


24 Cylinder


MIS

AER throwback photo of original "99"


Exciting seeing non stance boy enthused locals!


/May

[moatilliatta]

May 2020

Prog. Cont

Alignment saga





Just the window stickers spec, 15* sweep angle..

[moatilliatta]

May 2020

Prog. Cont

More wiring done! OBDII plug that connector that connects to my OBDII that is mounted to my fuse box a few post back.


Still fooling with my ABS mounting, Not that confident in its location yet.












Yaw sensor










Pull up resistor.




Had to change the logic to the ABS light on the dash panel

[moatilliatta]

May 2020

Prog.

More on the seats, I finally ordered another kit to complete both sides, being as I wasn't sure this was going to work even on one seat.




Factory Fresh








HVAC box delete cover

[moatilliatta]

Seems to be quite surprising while testing in casual attire, Single layer suit probably would benefit more.. I'm sure not a nice on track as a racetech vented seat

https://racetechseats.com/products/119-series.php

But for back Roads, HPDE, maybe time attack, It should do well, Especially stuck in the city.

I can do 30 min stints no problem, Usually after that is when I start sweating. I forgot cool shirt for a 1:45 stint in 90* weather. Luckily the being young thing is still working..

[Digitalwave]

Interested to hear how effective that seat cooling is. Especially when wearing Nomex?

[moatilliatta]

April 2020 Cont

Started on my heating and cooling seat setup, This car wont have A.C. which I'm completely ok with. But will be interesting how this keeps down the swamp ass on long hot drives.
I got the kit from Leatherseats.com, looks to be a common kit that others re-box

https://www.leatherseats.com/shop/seat-heater-cooler-unit-individual.html

[moatilliatta]

April 2020 Cont

Wiring:
Getting the dash panel sorted









Fuse box still coming together








Figuring out where things are going





Under hood harness re-wrapped

[moatilliatta]

April 2020 Cont

I wish I could say F it and done with DTM style arms




The whole brownie mountain
http://www.m3motorsport.co.nz/#!/pro...ear-suspension

[moatilliatta]

April 2020 Cont

No one really post or completes their car with Z3M trailing arms follow up with rear alignment specs...With the IE posi locks and the trailing arms bottomed out in their pockets I ended up with Zero toe. Before with the eccentric rear end I was around 1/8 out. At the time the best I could think in frustration was slotting out the pocket and milling out the posi lock slot to accommodate.

So back apart I go.

You can see the trialing arm adjusters are not maxed out but the bushing into the pocket is what gets maxed out. I was a bit surprised. Eager and frustrated I decided to just gut the pocket out and reinforce..

I had a guy lined up in Tennessee that could bend Z3M trailing arms into spec. I had no idea if mine were actually in spec or not.. But do to heath issues this fell though...

So to cutting I went

















But after thinking it though I realized that I'm just hurting my sweep angle. Any toe in compensation from stock hurts sweep angle.

In frustration and more research I hope to found a fellow to bend the trailing arms into spec on car, I get to keep factory sweep and get my toe fixed!

The A part of the trailing arm rubs on the gas filler tube.. I have a better reinforcement to come.

[moatilliatta]

WORK

Plugging and chugging

Fresh steering box for an 02



Some pipes welded and fitted





Some valve covers and Dinan mufflers installed on 540/6



Some wheels for the E30M rehab, Cool repro Pirelli's






Another S54 E36 next do done!


Shop visitor


More April E30 to come!

[moatilliatta]

APRIL 2020 - PT.1

Progress?
We spent over 7 Years building the Race car E30 you see at Road Atlanta, Finally! Were doing it and well. We never meant to win. Just finish. Last year we had some hurdles that we couldn't get a rolling. This year felt different, but then all the events started canceling... Watkins Glen was to be next.. So it looked like I was able to allocate some time back to lachs!

While wiring, Trying to take care of all the little bits also.
New side mirror motors!


The connector for my amp, I hope I can find a replacement to crimp in


Vac BBTB has returned




Sorting out my OBDII location, Yes I love the globe box flash light, But the OBDII port seems about perfect here




Fuse box coming together


Things are starting to tidy up!




Precision sound




Shortened up the wiring to the doors, Getting speaker wire ran, Had to rewire all the interior lighting.


I fought for a while of where to put the ABS unit, I Really wanted to put it on the passenger side... But to get right the engine has to come out to sweep 6 lines over. Also future S54 carbon airbox planning architecture was in mind. So I was like this should work.


Even fits my front strut tower tie in idea.


TBC