What did you do to your E30 today?

[straight6pwr]

after 20 years of torture driving past their headquarters almost everyday, i finally own some snap-on tools for the e30!

[ThreeTwentyFissel]

Replace 23 year old parts...

[hi its me alec]

So far today, I just went out and sat in the driver's seat for a few minutes, rowing through the gears and pretending to drive it. I had a good time

[Jim Lepage]

I removed all the old AC parts and painted my new engine cooling fan brackets with POR15.

[bimmer_E30]

Took my U.S projectors apart...awaiting for New lense and then i am gonna smoke em!

[mcr_driver]

drove it to and from work enjoying every second of it...soo glad to be back in a stick shift

[E30_Pare]

sanded and sprayed some primer. ;)

[newman]

I put the BMW emblem back on the trunk.

[evil_twin]

Replaced the tach backlight bulb

[jahnaboi]

Finished my e36 m3 driveshaft/new guibo (96mm)/new csb last night.

[SamE30e]

Dual trunk lights, and fixed my interior lights so they work. It was a very light day... ZING!

[Miasma]

Pulled some deep hail dents out of my vert's windshield frame, And prepped and primed it.

[bimmerpirate]

drilled holes and finally put the IS lip on the trunk. shoulda painted it first. the glossy black looks really bad with everything else being flat black.

[Jean]

My e30 decided to be a bitch today and woun't let me open the glovebox...I had to bitch slap her.

[reelizmpro]

Decided to install the tie rods I had sitting on the shelf for almost a year. At 142K miles, I figured the originals were about done. I rented a puller that made quick work of removing the joints. I need to get a slim 26mm box wrench so I can properly torque the new rods down before bending the locking tabs as all my wrenches are too thick. I found that the bolts on my swaybar links are loose. They are a little too small for the hole. I figured something was up.

Next: M3 offset control arm bushings for my convertible.