What did you do to your E30 today?
Collapse
This is a sticky topic.
X
X
-
I installed a Heckblende the other day. I've been wanting to put one on for a long time. I finally got around to doing it. -
Replaced my oil pressure sender, cleaned all the oil out of the connector, changed the oil and put everything back together. My drip pan is bone dry once again.
After that, I changed my brake fluid, bled the system, and took the car out for a test drive. Thanks to Jordan I now have working ABS again!Leave a comment:
-
Cleaned the greasy mess off of the bottom of my engine and replaced my ABS pump with this beauty from our own Jordan Sarette.
Specializing in the restoration, rebuild and remanufacturing of the ABS2 topology anti-lock brake hydraulic units.
Last edited by jgilber0; 05-30-2021, 07:47 PM.Leave a comment:
-
Attempted removal of passenger side front valence bolt via my friend the welder. Thing is rusted in, stripped out, and features broken off extractor tip compliments of previous owner's attempt at removal. We broke off a grade 8 bold (sheer failure brittle fracture surface) that was welded in! Now I have the task of trying to remove the bolt that was welded on and broken off. Hopefully I can get it out and test another extractor. If that doesn't work I may try welding again with a stainless steel bolt. If that don't work it'll be full drill out and re-tap.
In the meantime my r134 conversion will be on hold unless I decide to drain the cooling system and go at the condenser from the radiator side.Leave a comment:
-
I fully disassembled my brake calipers/mounts and cleaned them up. Next step is sandblast, then paint/powdercoat, and then a fresh rebuild.Leave a comment:
-
been playing with carbon - made some blank plates (2 layers). but prob will make it one piece with the duct for next try1 PhotoLast edited by almostacrayon; 04-12-2021, 11:28 PM.Leave a comment:
-
-
-
The only new users who post pictures are the ones in the classifieds selling their $20k 325e'sLeave a comment:
-
Maybe he meant to write in 99 but made an input error. Basically, I assume all new users are bots or scammers until they post that required pic, which almost none of them do. Frankly, once they do they should get a verified member title or something.Leave a comment:


Leave a comment: