What did you do to your E30 today?

[Buzztt]

Installed silver gauge rings, also installed mtech 2 steering wheel

[nando]

[cbouchez]

^^ I like the M3 mirrors in some cars.

[crazyman]

Got my new sport wheel installed in ETA and put one in the 318I. Had to install a grave yard muffler on the ETA cus the OEM one rotted out. The one I found was a thermal research an development, it actually sounds pretty good surprisingly.

[Deathtoll]

I removed my passenger side door sill and put in a new passenger side door seal which I bough from a friend with a wrecked e30. Then I went to home depot to buy some special pliers to remove the tabs. I put everything back together and it's good.

I also washed the car... umm let's see oh yeah I removed the mouldings on the right just to see if I could. I plan on removing them next weekend and covering them with plastidip. I really don't like it when moulding is painted to match the car exterior.

[phreshkid]

In my 320is, my shifter was getting sloppy, and I mean really really sloppy. As of yesterday, I completely lost 2nd and 4th gear entirely. There was so much slop in the shifter, that I couldn't even manage to engage in either of these gears. I managed to limp the car home using 1st, 3rd, and 5th gears and jacked the car up to take a look. There are two very important bolts that hold the metal shifter shroud to the transmission and one bold was completely missing and the other one backed out about 70%. I managed to find the missing bold wedged between the body and the exhaust shield and I got both bolts back in their original spots and tightened down.

I was so damn excited that the fix cost me nothing. It really is a pleasure to be able to use all 5 gears on these powerless vehicles.

It was awesome.

[CHIF8008]

installed new rear adjusters during lunch. oh and made a wood shift know a few days ago. doesn't get ice cold in the mornings! haha

[dmoney(AB)]

Swapped the 2.83lsd for a 3.73lsd to better match my r154 trans.

All done and in. Now to put her away for winter :(

[DHGurs]

Autocrossed it for the first time...

http://www.youtube.com/watch?v=pMZIZy46FZ8

[Buzztt]

Replaced the cogs in my gauge cluster, now the odometer works !

[Skunkworks]

washed it and drove it 90 miles to the Vintage show in van nuys....

[craiggroves91]

Slapped her ass

[aaalexzine007]

hi.......this is the best forum to discuss about e-30
well i have nevr drive this .....so no experience you can
contact to nay other person for better experience...........
..........

Top Ten Classified website

[crazyman]

Got new cap, rotor, wires, valve cover gasket, timing belt/tensioner, and thermostat for the ETA. Don't ask how much it all cost.

[Vivek]

GC coils with Koni's and an ejnight cross brace. Took about 4 times longer than it should have too.