SoCal General Chat

[dvck]

so replace the CSB, you're going to remove the driveshaft anyway, it takes 15 more mins to swap the mounted bearing.


edit* if you must be Mguiver-y you CAN mate the front of your shaft with the back of his. (still having to take the shafts apart)
AND you may have to replace the output flange on your transmission depending on the guibo size (giving yourself more work)

so replace your CSB, do it right and save yourself extra hassle.

[yert315]

The CSB's are interchangable, between auto/manual. But the early vs late csb is different.
Buy a new one and swap yours out.

[2mAn]

I've been waiting a loooooong time for you...

[Chilezen]

Thanks guys. New CSB it is. I'll also replace the flex disc too since the rubber has a cracks. Ireland has both, I should be able to pick it up soon. Any tips about taking out the shaft, or is it pretty straightforward? How could I also check the U-joints?
It's real fuckin dirty down there, can't tell if the trans output seal leaks or it's all just road grime.

[efficient]

as easy and straight forward it is to pull the driveshaft is, its a pain in the ass doing it on the floor.

[2mAn]

sorry for the giant picture. I will post a few more later, you will see why Im so excited

[AlonzoS]

sorry for the giant picture. I will post a few more later, you will see why Im so excited

Looks like you'll be installing that italvolanti is my guess 👍

[Rdannyr]

Please help me save my E30!!
I need some help I need to get my car running and I've run out of ideas. I runs but sounds pretty bad. I was all good until I did some maintenance like all gaskets and cooling system and cap/rotor spark plugs fuel filter fuel pump. The only mod I did was put in newly rebuilt 19lb injectors and a chip to match from mpowerful here on R3v. It started as a jumpy idle and I figured all this maintenance stuff would fix it but now its worse. If tried using multiple afms, fpr, cps, and ecus but it makes no difference.

Here's what it sounds like.

https://youtu.be/x73Ovt2-iUU

https://youtu.be/kKfRq6EeJTE

Pls hlep R3v my parents are getting fed up with car because its been sitting for months as i hardly have time for it since I go to school and work full time. They want me to sell it and a buy a new car. This time something reliable with 4 cylinders and fwd. Please don't let this happen lol. I've already put so much work into it, its my first car and its taught me so much.

Any help is extremely appreciated. If anybody is in the SGV and can lend a hand I'd really appreciate it in will to pay you or trade some e30 goodies I have.
If not any advice would be awesome as well thanks guys!

Sent from my LG-VS985 using Tapatalk

[IRON-E]

as easy and straight forward it is to pull the driveshaft is, its a pain in the ass doing it on the floor.

+1

Looks like you'll be installing that italvolanti is my guess ��

Beat me to the punch.

@Rdannyr; get a hold of Yert315, he'll help you sort your problems out. He's a mobile mechanic and has a thread here with feedback. Good luck.

[QUKBMER]

Good morning people. ..........Feed back please on anybody that has this on there car?....... Wilwood 310 mm front big brake kit for 16" wheels.

[2mAn]

Looks like you'll be installing that italvolanti is my guess ��

that is correct!

[e30lyf]

Good morning people. ..........Feed back please on anybody that has this on there car?....... Wilwood 310 mm front big brake kit for 16" wheels.

who makes BBK & what wheels you
running?

[QUKBMER]

who makes BBK & what wheels you
running?

HARTGE 11 spoke 16x7.5 wheels 4x100

[e30lyf]

HARTGE 11 spoke 16x7.5 wheels 4x100

IE 310mm will work and i have these sitting on garage NIB.

http://www.r3vlimited.com/board/showthread.php?t=255816

[Luke Girard]

So I sold the e36 today and am now looking for a new BMW any e30's for $2000 or less?????