SoCal General Chat

[Chilezen]

[2mAn]

Are you planning to shorten the front housings? Either way I can cut & weld them for you after work, on my own time. I'm happy with their kit, once I get an alignment it'll be great

I was planning on having them do the entire thing for me and they gave me a ballpark of ~$1200 which isnt much more than just buying the pieces separate ($300-Camber plates, $450- Springs/Adjusters, $350 Koni Struts = $1100). If the price comes in closer to say $1500, we'll talk for sure

[IRON-E]

I was planning on having them do the entire thing for me and they gave me a ballpark of ~$1200 which isnt much more than just buying the pieces separate ($300-Camber plates, $450- Springs/Adjusters, $350 Koni Struts = $1100). If the price comes in closer to say $1500, we'll talk for sure

Should have gotten in, during the black Friday sale. They apparently had really good deals.

[2mAn]

Should have gotten in, during the black Friday sale. They apparently had really good deals.

Normally I wouldve, but between Christmas presents and the Benz giving me a nice $XXXpensive surprise, buying coils wasnt even on my radar. I wasnt even planning on doing coils and was just going to get iX Koni's and call it a day, but the more I think about it, the more I want to just get it done right now

[E30 331is]

Anyone have a late model coupe driver side door moulding?

[///digitalme]

I think these are shot lol lasted less than id hoped for. These bushings are crap

[reelizmpro]

What material is that? delrin? I just use stock M3 offset rubber bushings on my cars.

[///digitalme]

Those are condor bushings. I think they are made of UHMW whish is plastic. I dont think these are good for bushings since they expand when heated. I drive about 10 miles a day and thats how they were when i changed them. I dont abuse or tracck my car either i wouldnt reccomend condor bushings to be honest. I swapped them for garagistic and so far night and day difference

[QUKBMER]

I won't be back on the site anymore today.Talk you guys next year !! Happy New Year !!! :popcorn::up::up::up::drink::drink::drink:

[IRON-E]

Happy New Year!!! to all you dirty rotten scoundrels

[LowR3V'in]

some old shit

[2mAn]

well, looks like the Benz is going to get lowered lol

[freeride53]

well, looks like the Benz is going to get lowered lol

don't do it. it will be all down hill from there. :(

BTW - drove back down to SoCal in an E30 this afternoon.

Feels SO good to be driving an E30 again.

[Violet88]

Hey still lookin for someone to help me with my m42 motor to get the oil pump to prime

[2mAn]

don't do it. it will be all down hill from there. :(

BTW - drove back down to SoCal in an E30 this afternoon.

Feels SO good to be driving an E30 again.

Always good to be driving an E30!

I already got a super low mileage C63 suspension setup probably going to combine it with h&r lowering springs. Should be fun

Not much more I want to do with the Benz after this besides installing the magnaflow x-pipe