Announcement

Collapse
No announcement yet.

Official SoCal PARTS For Sale Thread

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Originally posted by Motheye99 View Post

    I hav wanted to do this for a long time. I think you would need a custom sub frame. The E36 is rear sump, basically would have to weld it like a Arc Asylum S54 pan.
    I know that, but I mean, only modify the pan: cut the drainage and sump from the mating surface with all the holes, so that you basically have a ring left. And then weld a few new bent sheets of aluminium to the ring, so that it resembles an e34 pan.
    Custom oil pans have been made before for other cars, like old Chevy's, I think it could be done for us too.

    Currently building a badass coffee table
    Random stuff on insta @kevanromero

    Comment


      Originally posted by Chilezen View Post

      I know that, but I mean, only modify the pan: cut the drainage and sump from the mating surface with all the holes, so that you basically have a ring left. And then weld a few new bent sheets of aluminium to the ring, so that it resembles an e34 pan.
      Custom oil pans have been made before for other cars, like old Chevy's, I think it could be done for us too.

      Ah, I like that idea alot If you could come up with one i bet people would buy them. A E34 pan plus after market baffle would run you over 500$ now and its not great due to clearance.

      What would you use for the pickup? E34 or modify a M5x one.
      91' 318is 90' 325is

      Originally posted by Sonny
      Buy the E30s, they ain't gonna last long
      E30 can make you, E30 can break you
      "He who controls the Nova's, controls the Boomers"

      Comment


        it better to just buy a junk e34 someone wants to get rid of.

        Comment


          Anyone need some axles? Helping my buddy clean out the garage and we found FIVE! Axles. 2 look like brand new aftermarket axles and the other 3 look like used OEM. Not sure on the prices yet, hit me up and we can coordinate it all. Better price if you buy more
          Simon
          Current Car:
          -2002 MR2 Spyder



          Make R3V Great Again -2020

          Comment


            Searching for M52 manifolds.
            91' 318is 90' 325is

            Originally posted by Sonny
            Buy the E30s, they ain't gonna last long
            E30 can make you, E30 can break you
            "He who controls the Nova's, controls the Boomers"

            Comment


              What happened with the M54 headers you got?

              Currently building a badass coffee table
              Random stuff on insta @kevanromero

              Comment


                Originally posted by IRON-E View Post

                $380 cash
                I would be in at about 300$ Not sure if you’ll go for it . I’m very early in my search of putting together parts fit a swap .

                Comment


                  Originally posted by Chilezen View Post
                  What happened with the M54 headers you got?
                  someone on R3v told me he couldn't get the E46 M54 headers to fit. E36 M50 headers are all out of stock on EBAY. I may just cut my headers at the collectors to confirm they dont fit. Still looking for M52 manifolds or E36 headers.
                  91' 318is 90' 325is

                  Originally posted by Sonny
                  Buy the E30s, they ain't gonna last long
                  E30 can make you, E30 can break you
                  "He who controls the Nova's, controls the Boomers"

                  Comment


                    Originally posted by prisonerofdoom83 View Post
                    I would be in at about 300$ Not sure if you’ll go for it . I’m very early in my search of putting together parts fit a swap .
                    All good Sir., I'm sure there's always a cheaper way. The time spent sourcing 1 out, at an inexpensive price held my project for about 6 months. Until I pulled the trigger on the one I now offer back to others.

                    Good luck,
                    @IRON-E30 aka Edwin:D

                    Comment


                      Originally posted by IRON-E View Post

                      All good Sir., I'm sure there's always a cheaper way. The time spent sourcing 1 out, at an inexpensive price held my project for about 6 months. Until I pulled the trigger on the one I now offer back to others.

                      Good luck,
                      If it was holding up a project I would buy it from you no problem . At the moment I have zero parts for the swap . So I’m just on the lookout for a decently priced one as I know I will need it eventually. I’ve seen 2 others listed for 350$ and 400$ and another for 300$ that went quick . Your prize is not out of the question

                      Comment


                        Rx7 bbk conversion upgrade. $500 firm.
                        FD calipers powder coated and rebuilt with new seals.
                        mazda genuine parts shim kit
                        stop tech street pads
                        conversion bracket with mounting hardware, SS lines and required brake line adapters.

                        Interested parties text me 562.450.4393

                        Click image for larger version

Name:	1E8EA1E4-72ED-4ABE-A150-6B925B78340F.jpeg
Views:	218
Size:	38.9 KB
ID:	9942233
                        Attached Files

                        Comment


                          Originally posted by WestCoastEta View Post
                          I'm interested in the Zender skirts, maybe a few other things. Sending you a PM
                          Oh sorry for late replies. Didn't know I had email notification turned off. Answering people's pm's now. The side skirts a hard durometer rubber material and were painted black but paint is cracked when some fool pulled and flexed them off. One also has a major ding in rubber that will need to be filled to make it look flat before painting. But as we know Zender sideskirts are really rare..


                          Last edited by ACS325ic; 08-07-2020, 07:29 PM.

                          Comment


                            Pair of Bilstein HD rear shocks. Used E30 fitment. Worked when they were removed years ago. part number 6342028H000
                            Make offer.
                            Last edited by ACS325ic; 08-07-2020, 08:20 PM. Reason: add photo

                            Comment


                              Who needs a 3.73 (open) diff. Worked fine when it was removed at 71,000 miles. Slight crack on the plastic of the impulse connector.

                              Comment


                                Also have some Mustang Injectors (cheap) and
                                E30 325i throttle body
                                VDO gauges
                                One Touch window modules (bnib)
                                BavAuto headlight + early reflector protector shields (clear)
                                Last edited by ACS325ic; 08-10-2020, 01:35 PM.

                                Comment

                                Working...
                                X