175whp

[e dub]

Im waiting for the megasquirt to remover the afm and install a set of itbs.

My bbtb I got it from a friend who bought it form Gruten parts you can also buy it here. http://www.westcoastriots.com/htmlfiles/Products.html

What itbs do you plan on using? I have really been wanting to do this to my e30.

Oh yeah I would love to check this thing out in person next time I'm in PR. My fam lives in Rio Grande.

[kamotors]

must be tons of fun

[Fernflex]

My mechanic is the one doing all the work and thinking, the only thing I know he is going to cut the stock intake manifold and use 6 throttle from Suzuki gsxr 600.

Is pretty much a diy kit for less than $500. I hope it works, I know is not the first one he does.

Next time let me know I live 45 min from Rio Grande.

[sacse30]

pm'd

[Fernflex]

pm'd

I dont have any Pm's!

Im looking for an afpr but dont which one is better and also do you think is worth to remove the fan/fan clutch?

[Fernflex]

[BMW_325i]

That ^^^^ looks nice, hope it works out how you want it to.

Re AFPR, Ireland do an AFPR http://www.nexternal.com/ireland/fue...auge-p397.aspx,. I have one and it works fine.

Would recommend also getting a 90 degree rail -> fpr adaptor with the above eg http://www.ebay.com.au/itm/BMW-M20-F...item3f0fc42861

Alternatively there is a 3.5 bar fixed FPR that is the same package as stock, think it was a Porsche jobbie.

[Fernflex]

Thanks,

Doesn't IE include that adapter? or you recommend better the other one from ebay?

[BMW_325i]

IE kit has an adaptor but it is straight so the fuel hose has to make a reasonably sharp curve as it touches the bonnet. 90 degree adaptor just makes it neater.

[Fernflex]

Oh ok, I will buy IE and maybe get at homedepot a 90 degrees elbow. If not buy the other adapter from ebay!

Thanks

[Luis325]

Hurry up and get it done! Want to drive this thing!!!

[Fernflex]

afpr form IE ordered!

[Cronopoulos]

This car is awesome + sick setup! Subscribed.

[Bearmw]

I ended up using two 45 degree fittings to adjust the angle of the fuel hoses with the IE regulator on my M30 swap. Both fittings came to like $6 at the hardware store. I used one on the intake hole on the regulator and one on the outlet on the regulator which I mounted near the ABS unit. The original straight fittings on the IE regulator was secured with some type of loctite it seems.

[Fernflex]

Today I connected the Ms kit from blueapplesoda to remove the amf and use map, iat and tps sensor. The installation was very easy just crimp two cables for the iT sensor and nothing else. Everything is plug and play, the car started from the first try.
It has a base map to use the car and it works perfect, next week Im going to the dyno to tune the car without th itbs because I have a race on the 20th and the itbs are not going to be ready on time!