What kind of numbers are you getting from non vanos m50s
Announcement
Collapse
No announcement yet.
Markert Motor Works Dyno Thread (many inside)
Collapse
X
-
Originally posted by 328ijunkie View PostDepends on how you look at to be honest. N55s are currently claimed to not have as severe fueling issues at higher power levels but then again no one is at the power levels the N54 guys are for the most part. I will say in many respects they are much more reliable but ultimately (as of today) N54>N55 if you want some real power, easily, and cost effectively. No one has extensively mapped the N55 ecu as this was the ECU that started the changeover that theyre now using in all the F cars and thus youre extremely limited tuning wise. Cobb has stuff for early N55 cars but only have defined a select few tables and have left as far as future support goes.
Comment
-
9/14/15
Dyno tuned a pretty badass car we built. 99Z3 coupe, originally M52TU, Swapped with an M52. AASC Rotrex 13psi, intercooled, meth, m50 manifold, s52 cams, stock motor otherwise. 2 runs are max power on pump and then after turning meth on and retuning with it. Not bad for a 2.8L!
Check Us out on Facebook
Needing a harness adapter or wiring help? Check it out: also have 24v motor mounts, E30 M3 covers and E36 ECU mounts!
Full Product Line Tuning
OBD2 Tuning Available! OBD2 E36, S54 Swap, S62 Swap, etc: tuning@MarkertMotorWorks.com Dyno Thread
Comment
-
Originally posted by Graham325 View PostWhat kind of numbers are you getting from non vanos m50s
Originally posted by nando View Postdo you happen to have an N55 bin dump?
Check Us out on Facebook
Needing a harness adapter or wiring help? Check it out: also have 24v motor mounts, E30 M3 covers and E36 ECU mounts!
Full Product Line Tuning
OBD2 Tuning Available! OBD2 E36, S54 Swap, S62 Swap, etc: tuning@MarkertMotorWorks.com Dyno Thread
Comment
-
Originally posted by 328ijunkie View Post9/14/15
Dyno tuned a pretty badass car we built. 99Z3 coupe, originally M52TU, Swapped with an M52. AASC Rotrex 13psi, intercooled, meth, m50 manifold, s52 cams, stock motor otherwise. 2 runs are max power on pump and then after turning meth on and retuning with it. Not bad for a 2.8L!Simon
Current Cars:
-1999 996.1 911 4/98 3.8L 6-Speed, 21st Century Beetle
Make R3V Great Again -2020
Comment
-
Originally posted by nando View PostDid the E9x N55s run an MEVD17 as well? or just F3X? I thought the E9x cars ran MSD81.1
Originally posted by 2mAn View Postwow 400+whp is pretty insane, but even the turbo M52 makes a ton of power. that gives me bad ideas because there are CARB legal supercharger kits
Check Us out on Facebook
Needing a harness adapter or wiring help? Check it out: also have 24v motor mounts, E30 M3 covers and E36 ECU mounts!
Full Product Line Tuning
OBD2 Tuning Available! OBD2 E36, S54 Swap, S62 Swap, etc: tuning@MarkertMotorWorks.com Dyno Thread
Comment
-
9/16/15
Retuned an earlier ZM3 coupe. Bone stock S52 with dyno tune before to M50 manifold dyno tune after. No other changes, still full stock exhaust etc... As you can see the M50 manifold loosing torque no matter the tune myth has been dispelled.
Tuned another E92 M3. Pulleys and Intake and mufflers swapped to vibrant resonators.
Check Us out on Facebook
Needing a harness adapter or wiring help? Check it out: also have 24v motor mounts, E30 M3 covers and E36 ECU mounts!
Full Product Line Tuning
OBD2 Tuning Available! OBD2 E36, S54 Swap, S62 Swap, etc: tuning@MarkertMotorWorks.com Dyno Thread
Comment
-
Originally posted by The Dark Side of Will View Post30 HP from the M50 manifold? That's impressive.
And that's only peak to peak numbers. If you look around 6k RPM, there looks to be more than 30whp, gains under the curve are awesome.
Comment
-
Prob one of the coolest cars weve ever built. Prefer it over all the F8X.
(This is the previously mentioned M52 swapped Z coupe)
Check Us out on Facebook
Needing a harness adapter or wiring help? Check it out: also have 24v motor mounts, E30 M3 covers and E36 ECU mounts!
Full Product Line Tuning
OBD2 Tuning Available! OBD2 E36, S54 Swap, S62 Swap, etc: tuning@MarkertMotorWorks.com Dyno Thread
Comment
-
Originally posted by 328ijunkie View PostHavent seen a ton of 'bolt on' M52 turbo kits north of 400whp... And yeah once you get the carb sticker you can still tweak it some :P
That being said, an e30 with a supercharged 24v making 400whp is much more manageable to drive than a turbo one with the same power. That car you tuned would be even better with e85! Jordan tuned a stock motor, stock cam, Vortech based s52 e36 on, e85 at 14 psi and made 507whp/392wtq, and it ran an 11.67 @ 126! Blowers LOVE the corn juice!Last edited by e30polak; 09-18-2015, 10:56 AM.Check out Undr8d Empire on Facebook: www.facebook.com/Undr8dEmpireLlc
INSTAGRAM: @UNDR8D_EMPIRE
Scarlet V2 - #Project333Ti by @castromotorsport, @kingsautobodyshop, @bimmerheads, @hardmotorsport, @excel_motorsports & @mateomotorsports - http://www.r3vlimited.com/board/showthread.php?t=371356
Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.
Comment
Comment