Announcement

Collapse
No announcement yet.

[HOW TO] e46m3 6-speed your e30

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #61
    It can be done, we did three this month for our project cars
    "A casual stroll through the lunatic asylum shows that faith alone does not prove anything."

    Friedrich Nietzsche

    Comment


      #62
      i have a spare smg tranny

      Originally posted by chuck90m3 View Post
      It can be done, we did three this month for our project cars
      wondering if you can get mine to work normal and how much? thanks

      Comment


        #63
        I can it is around $450 with parts and you would need to cover shipping
        "A casual stroll through the lunatic asylum shows that faith alone does not prove anything."

        Friedrich Nietzsche

        Comment


          #64
          how about the 420 out of the e34 will it work?
          sigpic
          24v swapped

          Comment


            #65
            wrong bellhousing you need a 6SMT from a 6 cylinder car
            "A casual stroll through the lunatic asylum shows that faith alone does not prove anything."

            Friedrich Nietzsche

            Comment


              #66
              damn
              sigpic
              24v swapped

              Comment


                #67
                Can't wait to use this write up next year after deployment.
                Last edited by ban1; 02-23-2009, 06:49 PM. Reason: Tits

                Comment


                  #68
                  If you use the e46 330 Tranny, you need a flywheel from a Z4, X3, X5, 330 from 3/03 and some other cars. You can make an adapter to use a S50 flywheel but I did not use that in my swap.

                  Also you need to use the Shifter carrier from the e30 since the 330 tranny uses dual mounting points instead of single like the e46 m3. It must also be shortened.

                  Just some fft.
                  Past Car : E30 S50 6 Speed 5 Lug 3.73
                  Current : Z3 S50 OBD2 (Smog Legal) 6 Speed BBS RN Dual Ear Diff
                  ___________________________________________
                  BNB Designs
                  Engine Swaps, Fabrication, Innovation, General Repair
                  Richmond CA
                  Julian 848-248-8029

                  Comment


                    #69
                    What's a good price for the proper tranny?

                    Comment


                      #70
                      The prices are all over, I got my 6 speed for a G. But that was a SLAMMIN good deal.

                      Anywhere from 1k up to 2k.
                      Past Car : E30 S50 6 Speed 5 Lug 3.73
                      Current : Z3 S50 OBD2 (Smog Legal) 6 Speed BBS RN Dual Ear Diff
                      ___________________________________________
                      BNB Designs
                      Engine Swaps, Fabrication, Innovation, General Repair
                      Richmond CA
                      Julian 848-248-8029

                      Comment


                        #71
                        Past Car : E30 S50 6 Speed 5 Lug 3.73
                        Current : Z3 S50 OBD2 (Smog Legal) 6 Speed BBS RN Dual Ear Diff
                        ___________________________________________
                        BNB Designs
                        Engine Swaps, Fabrication, Innovation, General Repair
                        Richmond CA
                        Julian 848-248-8029

                        Comment


                          #72
                          FYI, I have read that you can use an automatic e36 M3 DS for this and have it bolt up. I purchased one just to see and it is way to short. Either I was sold the wrong drive shaft or this is not possible.

                          Comment


                            #73
                            Originally posted by Lag View Post
                            FYI, I have read that you can use an automatic e36 M3 DS for this and have it bolt up. I purchased one just to see and it is way to short. Either I was sold the wrong drive shaft or this is not possible.
                            You can use that DS with the ZF transmission, they are talking about the getrag here.

                            -Cam
                            Cam .W '91 325is

                            Spaz's 1991 Alpine White???? S52 Build Thread...

                            Comment


                              #74
                              Anyone making the cross member for this?

                              Comment


                                #75
                                ^ wondering the same thing, i still need one.

                                Comment

                                Working...
                                X