Another S52 swap... but this time with a newb!

[devonjordan]

Not my pics, but from the guy I bought it from.

http://www.r3vlimited.com/gallery/files/1/2/4/3/7/DSCN0417.JPG

http://www.r3vlimited.com/gallery/files/1/2/4/3/7/DSCN0418.JPG

[devonjordan]

Its complete, fuel rail injectors everything. Let me know what you dont need, I'll take it all off and ship it to you for 75 bucks. Even still has a DME attached, but Im keeping that.

[jahnaboi]

Decided to slap the tranny on and change the rear main seal/gasket.





So I'm just waiting on the junkyards to pop up with a e36 m50 or a e34 m50 to pick up a bracket and the wiring harness connectors to complete my incomplete harness plus the knock sensors. I could get all of these for free at a junker. =) Just gotta be patient I guess....

Anyone care to donate obd1 knock sensors laying around or anything? =)

[Jean]

Dude you work too fast!

Good luck on obd1 sensors, I had to buy two sets as I didn't like the first set (cracked casing)... or buy them new.

[MR 325]

Bought mine new, expensive parts they are!

[jahnaboi]

Matt is it possible to stretch a bimmerworld 3" silicone throttle body boot to 3.5" by heating it in hot water or something? Or is it not possible? Anyone know?

Jean, to my standards I'm working very slow. I'd cover so much more if only people meant what they said and sold what they said they were selling. grrr. Care to donate your cracked sensors? If they are still in one piece I could plastic weld the casing together and still use them...

[Jean]

Sorry, got rid of the them. Post a WTB in the e36 section on BFC.

[MR 325]

Matt is it possible to stretch a bimmerworld 3" silicone throttle body boot to 3.5" by heating it in hot water or something? Or is it not possible? Anyone know?

Probably won't be easy since those boots are so tough. I stretched my newish stock boot over the 3.5" MAF and that was torture. Maybe sell your boot and buy the 3" to 3.5" boot?

[jahnaboi]

How'd you stretch the stock boot?

[jahnaboi]

So I threw the motor on because I'm tired of seeing it outside my car and I'm running out of time/space/money.

Just need obd1 wiring harness bracket (part that holds wiring harness to the block and knock sensors...

[iwantspeed]

great work

[318isbmw]

So I threw the motor on because I'm tired of seeing it outside my car and I'm running out of time/space/money.

Just need obd1 wiring harness bracket (part that holds wiring harness to the block and knock sensors...

Nice, so close... Wiring aint too bad to be honest. Just gotta get started. I was freaked out too when i wired mine.

[jahnaboi]

Not even scared though. Just pissed that someone sold me an incomplete harness...

[e30s52]

How'd you stretch the stock boot?

Just get a 3.5. I cut my hand trying to get the damn boot over the 3.5 its a bitch. Just get the 3.5 and save yourself some trouble.

[e30polak]

Just get a 3.5. I cut my hand trying to get the damn boot over the 3.5 its a bitch. Just get the 3.5 and save yourself some trouble.

Or buy a silicone coupler from any place that sells turbo parts, and put a short piece of 3.5" tubing in between.