S54 swap questions and concerns

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • cek
    Member
    • Jan 2014
    • 85

    #211
    Originally posted by gpeterson
    Last two pictures & text at http://www.r3vlimited.com/board/show...1&postcount=15 describe how you can use the aux fan controller. I'd definitely recommend it, PWM fan is much nicer than something that cycles off & on.
    Any idea if the E28 fan will work with a PWM controller?
    Vlad: '87 535isMaytag: '87 528e'88 911Project Minerva - S54 E28

    Comment

    • gpeterson
      Advanced Member
      • Aug 2012
      • 119

      #212
      Originally posted by cek
      Any idea if the E28 fan will work with a PWM controller?
      Most likely would. Only potential issue I can see is the fan drawing more current than the controller can handle.

      Comment

      • jink0619
        E30 Modder
        • Dec 2011
        • 808

        #213
        Don't forget the o2 sensors(post cat) if that wasn't coverd yet
        sigpic
        E30love

        Comment

        • nando
          Moderator
          • Nov 2003
          • 34827

          #214
          you don't need the post cat O2 sensors at all.
          Build thread

          Bimmerlabs

          Comment

          • jink0619
            E30 Modder
            • Dec 2011
            • 808

            #215
            Oops pre cat and fuel pump relay(black)
            sigpic
            E30love

            Comment

            • nando
              Moderator
              • Nov 2003
              • 34827

              #216
              fuel pump relay = EKP. :p
              Build thread

              Bimmerlabs

              Comment

              • jink0619
                E30 Modder
                • Dec 2011
                • 808

                #217
                Originally posted by nando
                fuel pump relay = EKP. :p
                Ha! this reminds me of the time after my swap, car would not turn over, cause I mistakingly thought the Windshield washer relay was the EKP module DOH!
                sigpic
                E30love

                Comment

                • 328ijunkie
                  Forum Sponsor
                  • May 2007
                  • 3961

                  #218
                  Originally posted by jink0619
                  Ha! this reminds me of the time after my swap, car would not turn over, cause I mistakingly thought the Windshield washer relay was the EKP module DOH!
                  Still need to stop by :)

                  Check Us out on Facebook
                  Needing a harness adapter or wiring help? Check it out: also have 24v motor mounts, E30 M3 covers and E36 ECU mounts!
                  Full Product Line Tuning
                  OBD2 Tuning Available! OBD2 E36, S54 Swap, S62 Swap, etc: tuning@MarkertMotorWorks.com Dyno Thread

                  Comment

                  Working...