S54 swap?

[evangreen]

i dont doubt that anyone in this subforum would love an s54 e30, but for one you really cant use the stock computer (but if you want to, see the link i posted), and two, any standalone engine management that can handle an s54 to it's full potential (DBW, twin variable VANOS, etc) is $$$$$$$$

I was under the impression that the evosport aem was a stand alone system, thats how they have it advertised, not sure if it can control the twin variable vanos
http://www.evosport.com/product/aem/
is the $3595 the only reson people arent using this for e30 swaps?

[lifeiskaos]

I was under the impression that the evosport aem was a stand alone system, thats how they have it advertised, not sure if it can control the twin variable vanos
http://www.evosport.com/product/aem/
is the $3595 the only reson people arent using this for e30 swaps?

for $3595 you can have an obd1 m52 e30 with bolt-ons making 220whp. you are talking to an e30 crowd here... the people who have done the swap obviously werent stopped by the price, but most of us here dont have or are not willing to spend that kind of money. $3595 is only the beginning! then another 4k for the engine, more for tranny, a shit ton for custom tuning, more for exhaust, more to figure out brakes, more to put the DBW pedal in your e30

i dont see an s54 swap being done for less than $10,000

[evangreen]

for $3595 you can have an obd1 m52 e30 with bolt-ons making 220whp. you are talking to an e30 crowd here... the people who have done the swap obviously werent stopped by the price, but most of us here dont have or are not willing to spend that kind of money. $3595 is only the beginning! then another 4k for the engine, more for tranny, a shit ton for custom tuning, more for exhaust, more to figure out brakes, more to put the DBW pedal in your e30

i dont see an s54 swap being done for less than $10,000

Im not defending this as a resonable price for the benifit of the s54, like i said earlier its way too expensive for me.
I have an obdI m52 e30 which is more than enough to play around with for now...
I see people on here with close to 20k put into their e30's, just havent seen anyone running this product, which is the cheapest standalone ive seen claiming to be able to run the s54.

[MikeK]

do it fred. you'll be cool as those kids from Staten Island

[FredK]

Well, it's 2k9, and it's not on the street corner, but close. :mrgreen:

Haha. I don't want to spend any money now. All the sudden, I've become risk averse. I don't know why. I also don't have a ton of spare time.

I know the engine itself can be obtained for around $4500-5000 possibly with EWS parts, cluster, etc. I haven't really read up on the functionality of the DSC. I would probably want to retain that, and swap to four channel ABS. I know in principle the components involved, but how easy it is to get the wiring I am not quite sure of. I also would rather use the oilpan supplied. The S54 is a high performance engine with a high performance oiling system. This would require cutting into the firewall, which is probably not a huge deal, but then again, it takes me around a week to want to weld a radiator expansion tank bracket.

I am fairly certain the way to fast-track a project like this would be to get a Z3M donor car, or to use a standalone and tune it, neither of which I am set up to take on.

[nando]

Haha. I don't want to spend any money now. All the sudden, I've become risk averse. I don't know why.

did you turn 30?

[FredK]

I'm almost as old as you, grandpa. :razz:

[Bimmerman325i]

Granted, this is from ebay, but here's an auction for complete motor, tranny, and ALL electronics, from an M3.

http://cgi.ebay.com/ebaymotors/BMW-M3-S54-3-2L-Complete-Engine-6spd-Manual-Swap-66K_W0QQitemZ170314391782QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item27a78760e6&_trksid=p4506.c0.m245&_trkparms=72%3A1171|65%3A12|39%3A1|240%3A1318

There was a listing for a complete setup from an S54 MZ3, but it must have expired since the last time I was looking. For anyone who's interested, the complete package prices seem to be between $6-7k for an all inclusive setup.

Now if there was a way to run the stock e46 m3 dme in the car, maybe via turning off sensors? There's a guy on bimmerforums going that route with an E36:

http://forums.bimmerforums.com/forum/showthread.php?t=1108505

Some good info in those pages.

[evangreen]

I know this is an old thread but i thought ide revive it...
Im not sure how many of you guys check out bimmerforums but this guy is giving new inspiration to everyone who wants to do the swap

http://forums.bimmerforums.com/forum/showthread.php?t=1228477

NOt sure if anyone has already brought it up but i figured i would

[Farbin Kaiber]

Someone else has, I just don't recall where.

[moatilliatta]

any updates of the ews III bypass?

[FredK]

Evidently, it is possible to bypass EWSIII on the MSS54. However, I do not know how to do it.

[matt]

I will know how to do it soon. It is my current to-do task.

Soon could be relative. The sun will explode soon, in the grand scheme of the universe.

[FredK]

Oh? Is deleting DSC over CAN on that list too?

[e304me]

Has anyone thought of just using megasquirt? I think they should be able to control vanos by now?