Announcement

Collapse
No announcement yet.

M20 AFM to M30 AFM with 19lb injector questions

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #61
    On ebay there are a set of design 3's and there are another set of 19# but doesn't specify what design but they look older so I am guessing those are 2's.
    I will look for the 2's
    Originally posted by Nicademus
    My car beats off to that car. :bow:

    Comment


      #62
      Originally posted by Kingb View Post
      On ebay there are a set of design 3's and there are another set of 19# but doesn't specify what design but they look older so I am guessing those are 2's.
      I will look for the 2's

      design 2's are the ones that are skinny then fat then skinny

      Design 3's are about the same skinny size all the way down
      Need a performance chip for you BMW? Shoot me a PM and I'll get you taken care of!!
      Taylor- Follow me on Instagram @e30_fiend


      Comment


        #63
        are these design 2's?

        these are the ones that i have


        7speedshop.com

        Comment


          #64
          Originally posted by kamotors View Post
          are these design 2's?

          these are the ones that i have

          mine have black where yours have silver but they could have been paint stripped. Those are most definitely design 2s
          Need a performance chip for you BMW? Shoot me a PM and I'll get you taken care of!!
          Taylor- Follow me on Instagram @e30_fiend


          Comment


            #65
            ok cool. Those are the ones that I am going to buy on ebay. They are $55 with free shipping rebuilt
            Originally posted by Nicademus
            My car beats off to that car. :bow:

            Comment


              #66
              i used design three ... which are the thin ones and they work fine

              Comment


                #67
                OK so I finally installed the '027' M30 AFM today. Idles like shit every time I start it, then smooths out after 30 seconds or so. Plugged the M20 AFM back in, runs fine. What gives? I let it idle for about 30 minutes after installing the M30 AFM, and then drove it to work and back to give it a good workout. Is there something I'm missing?

                Comment


                  #68
                  Originally posted by CorvallisBMW View Post
                  OK so I finally installed the '027' M30 AFM today. Idles like shit every time I start it, then smooths out after 30 seconds or so. Plugged the M20 AFM back in, runs fine. What gives? I let it idle for about 30 minutes after installing the M30 AFM, and then drove it to work and back to give it a good workout. Is there something I'm missing?
                  mine did the same thing, weird huh, sometimes it runs good sometimes it runs like poop.


                  7speedshop.com

                  Comment


                    #69
                    Originally posted by kamotors View Post
                    mine did the same thing, weird huh, sometimes it runs good sometimes it runs like poop.
                    this may be worth a try, disconnect both battery wires, and touch them together. This completely clears any memory in the ECU. Connect the M30 AFM and then reconnect the battery.

                    This didnt happen to me but I'm just trying to help.






                    Taylor
                    Need a performance chip for you BMW? Shoot me a PM and I'll get you taken care of!!
                    Taylor- Follow me on Instagram @e30_fiend


                    Comment


                      #70
                      Did you only install the m30 AFM.... cause if so your running lean

                      Comment


                        #71
                        Originally posted by CorvallisBMW View Post
                        Is there something I'm missing?
                        yeah, the M30 AFM was designed for a different engine with a different ECU and a different tune with a different calibration. :roll:
                        Build thread

                        Bimmerlabs

                        Comment


                          #72
                          Originally posted by p0cket penguins View Post
                          Did you only install the m30 AFM.... cause if so your running lean
                          No, I also put on rebuilt 17.5lb injectors, 8mm plug wires and a K&N cone filter w/ heatshield.

                          Comment


                            #73
                            i tried disconnecting several times, and the problem always came back. the new AFM i bought the guy said he adjusted it to work on these engines, he said he loosened the wheel 2 clicks and he said it worked perfectly.
                            Last edited by kamotors; 08-29-2008, 09:26 AM.


                            7speedshop.com

                            Comment


                              #74
                              I was under the impression that no modifications were necessary to the '027' M30 AFM

                              Comment


                                #75
                                Originally posted by CorvallisBMW View Post
                                I was under the impression that no modifications were necessary to the '027' M30 AFM
                                me too, but obviously not because it didn't work for me or you.


                                7speedshop.com

                                Comment

                                Working...
                                X