M20 converted to Serpentine belt - Adding supercharger - Take 2

[whodwho]

I needed to get rid of that old nasty coolant reservoir and looked at this one to match the the other tank after powder-coating.

I had got this ebay one before, It is really well made and finished nicely and is same price or cheaper then a new stock tank. (I would like to see a sensor bung but oh well) The issue I had with it is it didn't fit with the brackets the way they were. I contacted them and they wanted pics of the stock one vs theirs but doesn't look like it ever got redesigned 8^(

So I bought another one and just made it fit, the lower bracket is just not even close to correct so after some cutting and bending in the end fits well.





I have seen these clamps before and thought I would try them on the ICV and hose splice (not shrunk yet)





Getting there, still need to mount up the small radiator and SC drain and some p-clamps here and there. That tank is just too shiny and needs to be powder-coated 8^)

[ForcedFirebird]

Tried on a few devices/PC's and the pics don't seem to be working.

[whodwho]

Well that just sucks 8^(

Like just the last set posted or all of them? On one of the site updates I couldn't attach pics so I started sharing and linking them but maybe that isn't working

[digger]

#31 doesnt show for me either

[whodwho]

Any better?

I think I found it, Google Drive changed its sharing default and you have to select a different option on each share

[daveduck]

Any better?

I think I found it, Google Drive changed its sharing default and you have to select a different option on each share

Yes it is working now, interesting setup! I'd like to see SC M20s become a thing.

[vWBIRDWv]

Nice work Whodwho im really looking forward to seeing this

[ForcedFirebird]

Lol. Whodwho has had his m20 supercharged for many years, for those who can remember e30tech days.

[digger]

Yes it is working now, interesting setup! I'd like to see SC M20s become a thing.

i'd like to see a twin screw

[vWBIRDWv]

I want to work something like this up for our motor ForcedFirebird but we only need 8psi for our build hahaha

[whodwho]

Haven't got much done with everything going on but did work on the clutch project. I was going to find someone to machine the flywheel for me and figured it wasn't complicated and I would invest it in a machine for myself and do projects 8^)

Picked up a HF bench mill, they are a re-branded Sieg X2 and not a bad machine for the price, about the same a drill press and hopefully a bit more accurate!

Blank button flywheel needing holes



I 3D printed a drill template and centered on a tight fitting socket to rotate on,



Chamfer the holes



Centered for the center hole



Drag out the new boring head



Having at it (sharpie doesn't like WD40)



Final pass



Give it a chamfer



Looking like it is ready to give it a go



Flex plate and spacer



Spacer needs a little thinning by 2mm



And all bolted up nicely



In all its glory and with APRs 8^)



Next up it's big brother

"

A not very common 8.5" Quarter Master, I have a single and dual disk in the hoard pile

[ForcedFirebird]

Super slick Keith! A machine is only as good as the operator. ;)

[dvallis]

Thread resurrection for parts confirmation. Will the M52 water pump pully and alternator pulley fit on an M20 water pump and alternator?