Honda K24 swap interest?

[rover215]

Yup, enough people were asking about them so we did some in our next batch of adapter plates.

We should have some machined billet aluminum engine mounts and an aluminum oil pan in the next couple weeks as well.

YESSSS! I'll be waiting for all of these ;D

[Shangsta]

Yup, enough people were asking about them so we did some in our next batch of adapter plates.

We should have some machined billet aluminum engine mounts and an aluminum oil pan in the next couple weeks as well.

:thankyou:

[ahrensNW]

Any updates?

[E30 Wagen]

This is interesting as an option to replace my tired m42 and maintain weight balance. However the cost and hassle are a deterrent. If a hotter m42 engine could be assembled for ~75% of the cost and achieve ~75% of the power of a K series swap kit, then for the sake of simplicity I'd just keep the m42 in there.

What I really want to see is a 5th gen Honda Prelude rwd K series conversion kit, should be simple enough to figure that out...

[varg]

If a hotter m42 engine could be assembled for ~75% of the cost and achieve ~75% of the power of a K series swap kit, then for the sake of simplicity I'd just keep the m42 in there.

75% of the power? Aiming low! That's only 150-166hp depending on which K20 variant you use (engines under 200hp excluded). Even then, with M42s being fairly expensive for a 4 cylinder, a 150hp NA build will still cost you a quite a lot for what you're getting.

[ahrensNW]

75% of the power? Aiming low! That's only 150-166hp depending on which K20 variant you use (engines under 200hp excluded).

But also you could build an n/a k24 that makes 300whp for a relatively small sum. Higher power is much more attainable as well.

[agile30]

Haters will say it is photoshopped. But it retains AC and powersteering. Just no heat.

[wholepailofwater]

looks legit to me :shock:


Any word on this? I am counting the days.....


JP

[2mAn]

Haters will say it is photoshopped. But it retains AC and powersteering. Just no heat.

Amazing. I love it. A/C functions but no heat :rofl:

[TobyB]

No engine mounts, either, that I can see.

Don't Honda engines spin backwards?

:p

t

[agile30]

If anyone is interested someone let the cat out of the bag on R3V favebook where i posted my picture. They put up their Turbo K series in the M3

[wworm]

interest has peaked as of late....I wanna see this done

or give it a shot myself

[KMiata]

Hey guys, things are still moving along nicely. Mounts and pan should be done soon. We skipped making rough prototype parts for testing and went straight to making some nice production pieces because we have a lot of confidence in this swap being popular.

We also still have a few K to G260 adapter plates on the shelf for those of you who want to jump in and give it a shot.

[Sladek]

Honda K24 swap interest?

Hey guys, things are still moving along nicely. Mounts and pan should be done soon. We skipped making rough prototype parts for testing and went straight to making some nice production pieces because we have a lot of confidence in this swap being popular.

We also still have a few K to G260 adapter plates on the shelf for those of you who want to jump in and give it a shot.

do you have a ballpark price on mounts and pan? will we be able to buy just the pan?


Sent from my iPhone using Tapatalk

[wholepailofwater]

Yesssssss!