ASK ALL WHEEL/TIRE FITMENT QUESTIONS HERE - The Official Wheel/Tire Fitment Thread
Collapse
This is a sticky topic.
X
X
-
Comment
-
To get the Star Specs on, because the offset of those Fittis (see, I remember shit) is pretty conservative you will likely just have to bang in a little bit of metal/plastic on the front. The rear should be okay. Normally I don't recommend the 25" tires but I know you're willing to work for it.Comment
-
Comment
-
Once you're there, you'd either have to run very stretched tires (205s) with rolled or possibly pulled fender lips or run something larger (225s) with extreme fender pulling or flares.
Unless this is an all-out auto-x car I probably wouldn't bother. A 15x8 +20 version with a 225 is a lot of contact patch.Comment
-
Thanks...would I need fender rolling with the e36 setup?Alex 88 m5 | 91 318is | 19 Subaru Ascent
BMW Tool Rentals & Fender RollerComment
-
In the future I want to run a set of 16x7 O.Z. Ultraleggera on my '87 4dr
I am running ground control coilovers and billy sports.
I am mearly asking about what tires I should run and any other bits since I am planning on tucking a TINY bit of tire. Before the rims and tires I am getting GC front camber plates and rear weld in E30tech camber fix. Also doing lug nut stems instead of the short fat headed e30 lugs. Sorry if there is a better word for lug nut stems
And info about what I should do or get would be grand. Spacer size would be good too.
P.S. 210-215 in the front and 225 in the rears?http://www.tirerack.com/wheels/Wheel...All&sort=Brand~ Puch Cafe. ~ Do business? feedback ~ Check out my leather company ~
Instagram: @BWeissLeather
Current cars:
~ '87 325 M30B35 swap
~ '87 535
~ 01 540 Msport 6spd
~ '06 X5 4.8isComment
-
Originally posted by JandersonAlright Jay, here's what I'm planning:
16x7.5 ACT weaves, they are 5x120, ET30. I'll be running 20mm adapters, putting them at ET10, correct? Will a 205/50/16 fit under there? My front fenders are rolled, rears are not yet, but will be. If that's too much, I have no issue with a little stretch.Comment
-
Hi i chose to go with a differant wheel any way what came off was a 15x8 offset -6 what needs to go on is 15x7 offset 20 what size spacers im gonna need please!!!!????
thanks again!!!Comment
Comment